PCB Piezotronics / IMI Sensors 국내총판대리점 - 케이티엠엔지니어링

 

PCB Piezotronics / IMI Sensors 국내총판대리점 - 케이티엠엔지니어링

PCB Piezotronics / IMI Sensors Domestic Distributor - KTM Engineering

PCB Piezotronics / IMI Sensors Exclusive distributor in Korea - KTM Engineering

​

산업용 센서 / 진동센서 / 진동엔지니어링 / PCB진동센서 / PCB가속도센서 / PCB사진동센서 / PCB사가속도센서 / IMI진동센서 / IMI가속도센서 /

TMS진동캘리브레이터 / TMS Proximity Transducer Calibrator / TMS Portable Vibration Calibrator

-> 케이티엠엔지니어링이 정식 한국대리점입니다.

​

PCB Piezotronics의 사업부인 IMI Sensors, THE MODAL SHOP 은 가속도계, 진동 트랜스미터 및 진동캘리브레이터 같은 산업용 진동 모니터링 기기의 글로벌 설계 및 제조업체입니다.

​

국내독점 정식대리점에서 고객 맞춤 서비스를 제공하여 드립니다.

​

진동, 변위, 하중, 응력 (유, 무선) 측정 전문업체

​

​

(주)케이티엠엔지니어링

전화: 031-628-6078

메일: dyk@ktme.com ｜홈페이지: http://www.ktmeng.com

주소: 경기도 성남시 분당구 대왕판교로 670 유스페이스2 B동 808호

M2000X01	Lightweight 1.043 kg (2.3 lb) magnesium made head expander with 32 stainless steel inserts (M5 x 0.8) on a 178 mm (7") diameter table. Fits both 2075E and 2110E shakers.
MCS-1	Calibration of 130 series array microphone and preamplifier pair, NIST traceable.
MCS-13	Certification of 426 series ICP® microphone preamplifier, NIST traceable.
MCS-19	Recalibration of LanSharc SDC003, NIST traceable.
MCS-2	Calibration of standard precision condenser microphones, NIST traceable. A2LA accredited.
MCS-21	Recalibration of VibeAlarm SDC002, NIST traceable.
MCS-27	Recalibration of reference microphone for 9350C system, NIST traceable. A2LA accredited.
MCS-3	Calibration of a phase matched microphone pair, NIST traceable.
MCS-31	High g accelerometer calibration using PneuShock to max 10,000g range at 5 amplitudes. NIST traceable. A2LA accredited.
MCS-32	Reference standard calibration service for shock reference accelerometer. Secondary calibration from 10 Hz to 10 kHz, includes primary calibration at reference frequency and linearity data to 10 kg. NIST traceable. A2LA accredited.
MCS-33	Single axis amplitude and phase response calibration from 5 Hz to upper 5% frequency, NIST traceable. A2LA accredited. Includes sensor bias measurement for ICP® sensors and resonant frequency sweep up to 50kHz.
MCS-33T	Triaxial amplitude and phase response calibration from 5 Hz to upper 5% frequency, NIST traceable. A2LA accredited. Includes sensor bias measurement for ICP® sensors and resonant frequency sweep up to 50kHz.
MCS-34	For non-PCB piezoelectric, piezoresistive and variable cap accels, single axis amplitude & phase response calibration from 5 Hz to upper 5% frequency, NIST traceable. A2LA accredited. Includes sensor bias measurement (for ICP® sensors) and resonant frequency sweep up to 50kHz
MCS-34T	For non-PCB piezoelectric, piezoresistive and variable cap accels, triaxial amplitude & phase response calibration from 5 Hz to upper 5% frequency, NIST traceable. A2LA accredited. Includes sensor bias measurement (for ICP® sensors) and resonant frequency sweep up to 50kHz
MCS-35	Single axis high frequency amplitude and phase response calibration from 5 Hz to 20 kHz. NIST traceable. A2LA accredited. Includes sensor bias measurement (for ICP® sensors) and resonant frequency sweep up to 50kHz.
MCS-35T	Triaxial high frequency amplitude and phase response calibration from 5 Hz to 20 kHz, NIST traceable. A2LA Accredited. Includes sensor bias measurement (for ICP® sensors) and resonant sweep up to 50kHz.
MCS-36	TEDS sensor programming using 400B76 utility software.
MCS-4	Calibration of pistonphone, NIST traceable.
MCS-41	Accredited Calibration Service for Model 422M184
MCS-41	Accredited Calibration Service for Model 422M184. A2LA accredited.
MCS-56	Calibration of speakerphone, NIST traceable.
MCS-6	Certification of precision microphone preamplifiers, NIST traceable.
MCS-9	Calibration of precision microphone/preamplifier pair, NIST traceable. A2LA accredited.
MCS-A001	Calibration of accelerometer, single axis amplitude and phase response from 5 Hz to upper 5% frequency, NIST traceable. A2LA accredited.
MCS-A001-A004	Calibration of accelerometer, single axis amplitude and phase response from 0.5 Hz to upper 5% frequency, NIST traceable. A2LA accredited.
MCS-A001-A004T	Calibration of triaxial accelerometer, amplitude and phase response from 0.5 Hz to upper 5% frequency, NIST traceable. A2LA accredited.
MCS-A001T	Calibration of accelerometer, triaxial amplitude and phase response from 5 Hz to upper 5% frequency, NIST traceable. A2LA accredited.
MCS-A002	Calibration of accelerometer, single axis amplitude and phase response at 80, 100 and 160 Hz, NIST traceable. A2LA accredited.
MCS-A002T	Calibration of accelerometer, triaxial amplitude and phase response at 80, 100 and 160 Hz, NIST traceable. A2LA accredited.
MCS-A009	Calibration of handheld calibrator, models 394C05, 394B06, and 394C06 or similar. NIST traceable.
MCS-A010	System calibration for calibration standard system. Frequency sweep from 5 Hz to 10 kHz, NIST traceable. A2LA accredited.
MCS-A013	System calibration for calibration standard system w/ data on disk (for TMS 9155 and 9150D). Frequency sweep from 5 Hz to 10 kHz, NIST traceable. A2LA accredited.
MCS-A047	Calibration of USB signal conditioner 485B36 2 channel, NIST traceable.
MCS-A065	Primary accelerometer calibration service, using laser interferometry per ISO 16063-11 from 5 Hz to 20 kHz at up to 45 specific, user defined frequencies. A2LA accredited.
MCS-A067	Single point primary accelerometer calibration via laser interferometer at 100 Hz. A2LA accredited.
MCS-E001	Calibration of 422 series in-line charge amplifier, NIST traceable.
MCS-E003	Calibration of 480 series (480C, 480C02, 480D, & 480D02) and model 478A01, NIST traceable. A2LA accredited.
MCS-E004	Calibration of 480 series (480E06, 480E09, 480D06, & 480D09) with multiple gain x1, x10, x100, NIST traceable. A2LA accredited.
MCS-E004A	Calibration of models 480A08, 480A10, & 480B10, NIST traceable. A2LA accredited.
MCS-E004B	Calibration of models 480A21, 480B21, & 480A22, NIST traceable. A2LA accredited.
MCS-E005	Calibration of models 482A, 482A06/B06, 482A05/B05, 482A04, 482A21, & 482A22, NIST traceable. A2LA accredited.
MCS-E005A	Calibration of models 484B02, 484B06, 482A10, & 482B11, NIST traceable. A2LA accredited.
MCS-E005B	Calibration of models 482A18, 482A19, 482A20, 442A05, 442B05, & 442C05, NIST traceable. A2LA accredited.
MCS-E010	Calibration of series 481, models 533, 583, 584, 478A16 & 478A17 16-channel signal conditioner, NIST traceable.
MCS-E012	Calibration of models 442B06, 442A101, 484B11, & 442A06, NIST traceable. A2LA accredited.
MCS-E013	Calibration of models 443B101 and 443B102 signal conditioner module, NIST traceable. A2LA accredited.
MCS-E014	Calibration of models 442A102, 442A01, 442B01, 442A02, 442B02, & 442A103 signal conditioner module, NIST traceable. A2LA accredited.
MCS-E015	Calibration of models 482A16, 482A17, 442A104/B104, & 442A04/B04/C04, NIST traceable. A2LA accredited.
MCS-E019	Calibration of 8-channel model 481A, NIST traceable. A2LA accredited.
MCS-E21	Re-calibration 401A04 / 401B04. NIST Traceable. A2LA accredited
MCS-H001	Calibration of 291 series complete hammer kit, NIST traceable. A2LA accredited.
MCS-H002	Calibration of 086 series instrumented hammer or similar, NIST traceable. A2LA accredited.
MCS-H003	Calibration of 288 series Impedance Head, NIST traceable. A2LA accredited
MCS-H004	Calibration of Modal Punch Model 088A, NIST traceable. A2LA accredited.
MD821AM/A	Lightning to USB Camera Apple Cable Adaptor
Model Number	Product Description
MRS-1	Annual Shaker Maintenance. Service includes replacement of anti-rotation bands, re-alignment, new locks if required, cleaning, and inspection.
NDT-AES1	NDT Application Engineering Services - 1 day (travel expenses separate)
NDT-AUTO-0408	NDT-RAM Automated Resonant Inspection System with 4 ft long x 8 in wide (1.22m x 203cm) integrated conveyor, analyzer, microphone, industrial computer, PLC, installation & training (travel expenses separate)
NDT-AUTO-0612	NDT-RAM Automated Resonant Inspection System with 6 ft long x 12 in wide (1.83m x 305cm) integrated conveyor, analyzer, microphone, industrial computer, PLC, installation & training (travel expenses separate)
NDT-AUTO-0812	NDT-RAM Automated Resonant Inspection System with 8 ft long x 12 in wide (2.44m x 305cm) integrated conveyor, analyzer, microphone, industrial computer, PLC, installation & training (travel expenses separate)
NDT-AUTO-0818	NDT-RAM Automated Resonant Inspection System with 8 ft long x 18 in wide (2.44m x 457cm) integrated conveyor, analyzer, microphone, industrial computer, PLC, installation & training (travel expenses separate)
NDT-AUTO-12-DRIVER	NDT-AUTO CONVEYER DRIVER DUAL OUTPUT 12"
NDT-AUTO-18-DRIVER	NDT-AUTO CONVEYER DRIVER DUAL OUTPUT 18"
NDT-AUTO-Casters	NDT Swivel Locking Casters
NDT-AUTO-ENCD	NDT-AUTO Encoder Coupler Kit with gaurd
NDT-Belt0408	Replacement conveyor belt for NDT-AUTO 0408
NDT-Belt0612	Repalcement Belt for NDT Auto 0612 Installation not included
NDT-Belt0818	Standard Urethane Spare Belt (MAA) for 18" Wide x 96" Long 125 Series
NDT-CAL1	Calibration Kit for NDT-RAM systems, includes 1kHz acoustic calibrator and calibration reference part certified over the operating range of the NDT-RAM system
NDT-CAL1 Service	On-site calibration of NDT-RAM system
NDT-CAL2	Calibration Kit for NDT-RAM systems, includes 1kHz acoustic calibrator (with A2LA accredited calibration certificate) and calibration reference part certified over the operating range of the NDT-RAM system
NDT-CAL2 Service	On-site calibration of NDT-RAM system with A2LA accredited calibration of acoustic calibrator
NDT-DTF4	NDT-RAM automated small part drop testing system with adjustable part slide, analyzer, force transducer, microphone, industrial PC, installation & training (travel expenses separate).
NDT-DTF-C03	Replacement spare parts including force sensor, cable, and heat shrink for NDT-DTF system
NDT-ENCD	Encoder for NDT-AUTO systems
NDT-ESP2-DI-SEMI	NDT-RAM External Setup Program for use with NDT-SEMI systems - Optionally accepts Digital Input from a robot or other external equipment for software based control
NDT-FTTRIG	Foot trigger switch for NDT-HAM3 automated industrial electric impact hammer
NDT-HAM1	Manual impact hammer for NDT-RAM systems
NDT-HAM3	Automated industrial electric impact hammer kit includes 086M92, foot trigger switch, power supply, and spare impact tips/adapters
NDT-HAM3-AFC	Automated industrial electric impact hammer kit with automated force control (AFC) option, includes 086M92, foot trigger switch, power supply, and spare impact tips/adapters
NDT-HAM3-VI	Automated industrial electric impact hammer kit with Vertical Impact Orientation (VI) option, includes 086M92, foot trigger switch, power supply, and spare impact tips/adapters
NDT-HAM3-VI-AFC	Automated industrial electric impact hammer kit with automated force control (AFC) and Vertical Impact Orientation (VI) options, includes 086M92, foot trigger switch, power supply, and spare impact tips/adapters
NDT-HAM-AFC	NDT-RAM Automated Force Control (AFC) Automation components, includes PLC, ethernet switch, and terminals
NDT-IPC3	Integrated industrial PC package, mounting stand, and keyboard tray for NDT-RAM systems
NDT-MAN	NDT-RAM Manual Inspection System, includes analyzer, NDT-HAM1 manual impact hammer, microphone, laptop PC, NDT-RAM software, installation & training (travel expenses separate).
NDT-MAN-HAM3	NDT-RAM Manual Inspection System, includes analyzer, NDT-HAM1 manual impact hammer, NDT-HAM3 automated impact hammer, microphone, laptop PC, NDT-RAM Software, installation & training (travel expenses separate).
NDT-MAN-NOPC	NDT-RAM Manual Inspection System, includes analyzer, NDT-HAM1 manual impact hammer, microphone, NDT-RAM Software (on flash drive), installation & training (travel expenses separate).
NDT-MAN-PC	Laptop PC for NDT-RAM systems
NDT-MIC2	ICP microphone with integral preamplifier, BNC connector, also includes three (3) windscreens
NDT-MIC2-MAGMT	Magnetic microphone mount for NDT-RAM systems
NDT-QST1	NDT Quick Start Training - 1 day (travel expenses separate)
NDT-RAM	Nondestructive Testing Resonant Acoustic Method Application Software
NDT-Scale1	Scale for Weight Compensation integration with NDT-RAM
NDT-Scale2	Scale for Weight Compensation integration with NDT-RAM, supports up to 15Kg (33lb) Requires manual part placement
NDT-SCANNER	Handheld USB bar code scanner for use with NDT-RAM systems
NDT-SDC003	NDT-RAM Smart Digital Controller kit with power supply, mounting adapters, and cabling
NDT-SDC003-Box	NDT-RAM Smart Digital Controller
NDT-SEMI	NDT-RAM semi-automated resonant inspection system, includes analyzer, microphone, industrial PC, NDT-HAM3 automated electric impact hammer, NDT-RAM software, installation & training (travel expenses separate)
NDT-SEMI-NO IPC	NDT Semi-automated Resonant Inspection System includes Lansharc LAN2, mic/preamp, NDT-HAM2 electric hammer, NDT-RAM software (on flash drive), installation & training (travel expenses separate)
NDT-SI1	NDT System Integration - 1 day (travel expenses separate)
NDT-TS2	NDT-RAM test station for resonant inspection, includes test frame with 12"x12" adjustable table (305cm x 305cm), analyzer, microphone, NDT-HAM3 automated industrial impactor, laptop PC with adjustable stand, NDT-RAM software, installation & training (travel expenses separate)
NDT-TS2/1824	NDT-RAM test station for resonant inspection, includes test frame with 18"x24" adjustable table (457cm x 610cm), analyzer, microphone, NDT-HAM3 automated industrial impactor, laptop PC with adjustable stand, NDT-RAM software, installation & training (travel expenses separate)
NDT-WS3	Windscreens for NDT-MIC2, pack of 3
PD-0672-01	Load cell mount for 086M92 industrial impactor
PD-0676-01	Linear Bearing Front and Rear for 086M92
PD-0704	Steel hammer tip for 086M92
PD-0704-01-T3	Hardend Steel Tip for 086M92
PD-2008	ESD resistance dongle for NDT-RAM systems
Primary ILC	Interlaboratory Comparison for Primary Vibration Measurement
PulseDriver	Magnetic tachometer pickup preamplifier for direct interface to ICP® sensor signal conditioners, includes selectable divider circuit.
PVC-HTMNT01	Mounting Plate, 3 and 4-Hole High Temp Vibration Sensors
PVC-HTMNT02	Mounting Plate, 3 and 4-Hole High Temp Vibration Sensors
PVC-MNT01	M8x1.25 F Mounting Pad
PVC-MNT02	M8x1 F Mounting Pad
SDC003-DC20	SDC003 digital cable, blunt cut, 20 ft.
SDC003-PS24	NDT-RAM 24VDC power supply terminated in 3-pin conxall connector for NDT-HAM3
SDC003-PS24P	NDT-RAM 24VDC power supply terminated in 3-pin conxall connector for NDT-SDC003
SDC003-SL07	Shielded LAN cable for SDC003, 7 ft. length, for connecting SDC003 to network hub or switch
SDC003-SLC10	Shielded LAN cable for SDC003, 10 ft. length, for connecting SDC003 directly to PC
Spare Reference Kits	See sections immediately below for available configurations of reference accelerometer kits.
TRAVEL-CALIBRATION	Estimated Travel and Lodging Expenses not included in the Daily Rate
V485B39	2-channel, voltage inputs, USB-powered, sensor signal conditioner with USB digital output (24-bit A/D).
VV-60	NDT-HAM3 compression spring
009N03	Multi-conductor ribbon cable, 3-ft, 9-pin female to (1) 9 pin male and (1) 9-pin female conn.
013GN005GP	Hardline, 2-conductor, silicon dioxide dielectric (-300 to +1200 F), 5-ft, 2-socket plug, 7/16-27 thd (for 013 hardline cable)2-pin jack, 7/16-27 thd (for 013 hardline cable)
013GN010GP	Hardline, 2-conductor, silicon dioxide dielectric (-300 to +1200 F), 10-ft, 2-socket plug, 7/16-27 thd (for 013 hardline cable)2-pin jack, 7/16-27 thd (for 013 hardline cable)
013GN020GP	Hardline, 2-conductor, silicon dioxide dielectric (-300 to +1200 F), 20-ft, 2-socket plug, 7/16-27 thd (for 013 hardline cable)2-pin jack, 7/16-27 thd (for 013 hardline cable)
013GN030GP	Hardline, 2-conductor, silicon dioxide dielectric (-300 to +1200 F), 30-ft, 2-socket plug, 7/16-27 thd (for 013 hardline cable)2-pin jack, 7/16-27 thd (for 013 hardline cable)
032M03A	General purpose, lightweight, twisted/shielded pair cable, 5-ft, 10-32 plug to pigtails
034M22	Low Outgassing, 4-conductor, shielded cable, 20-ft, 4-pin plug to (3) BNC plugs, with FKM heat shrink
039A25	Removal tool (for M3 conn.)
039A26	One-piece removal tool (for Model 352C23)
039A27	One-piece removal tool (for Models 352A21, 352C22, 357A09 & 357C10 )
039A28	One-piece removal tool (for Model 352A24)
039A29	One-piece removal tool (for Model 357A08)
039A31	One-piece removal tool (for Model 352A56)
039A32	Removal tool (for Model 352A71)
039A35	Removal tool (352A74)
039A37	One-piece removal tool (for Model 352A91 & A92)
040A37	Hex nut driver, 5/32" (for series 105C)
040A40	Installation/extraction tool for 115A04
040A41	Mounting Key for M5 size 115A04 Combustion Pressure Sensor
042AE003BZ	042 cable, 3-ft, environmentally sealed MIL-type, 2-socket conn. to blunt cut termination
045ET020AD	Very high temperature low noise PFA cable, 2-conductor, twisted pair, shielded, 20-ft, 400F 2-socket 7/16-27 connector to Pigtail leads, stripped and tinned
045M19B	Low noise Aramid cable, small (7/16-27 thread) 2-pin mini-MIL connector (QY) to large 2-pin MIL 25 ft length
045M21B	Low noise Aramid cable, small (7/16-27 thread) 2-pin mini-MIL connector (QY) to pigtails 25 ft length
045M19B/010	Low noise Aramid cable, small (7/16-27 thread) 2-pin mini-MIL connector (QY) to large 2-pin MIL 10 ft length
045M21B/010	Low noise Aramid cable, small (7/16-27 thread) 2-pin mini-MIL connector (QY) to pigtails 10 ft length
045M21B/020	Low noise Aramid cable, small (7/16-27 thread) 2-pin mini-MIL connector (QY) to pigtails 20 ft length
045M21B/030	Low noise Aramid cable, small (7/16-27 thread) 2-pin mini-MIL connector (QY) to pigtails 30 ft length
045M21B/M006	Low noise Aramid cable, small (7/16-27 thread) 2-pin mini-MIL connector (QY) to pigtails
045M21B/M015	Low noise Aramid cable, 15meter small (7/16-27 thread) 2-pin mini-MIL connector (QY) to pigtails
045M21B/M021	Low noise Aramid cable, 21meter small (7/16-27 thread) 2-pin mini-MIL connector (QY) to pigtails
050BQ006AC	Polyurethane coiled cable, 6-ft, 2-socket MIL-type conn., right angle to BNC plug
050BQ010LU	Cable
050FV006HX	2130 CSI data collector interface cable, coiled 6-ft, 2-socket MIL with environmental boot to 5 pin Turck conn.
050FV006HX	2130 CSI data collector interface cable, coiled 6-ft, 2-socket MIL with environmental boot to 5 pin Turck conn.
050LQ006AC	2-cond. twisted/shielded pair, coiled polyurethane cable, 6-ft, 2-pin MIL w/ env. sealed backshell, extended strain relief to BNC plug
050LQ006DP	2-cond. twisted/shielded pair, coiled polyurethane cable, 6-ft, 2-pin MIL w/ env. sealed backshell, extended strain relief to 7-pin LEMO connector
050LQ006LU	2-cond. twisted/shielded pair, coiled polyurethane cable, 6-ft, 2-pin MIL w/ env. sealed backshell, extended strain relief to 3-pin plug, quick disconnect conn.
050LQ010HX	2-cond. twisted/shielded pair, coiled polyurethane cable, 10-ft, 2-pin MIL w/ env. sealed backshell, extended strain relief to 5-pin Turck conn.
052AE010BZ	052 cable, 10-ft, environmentally sealed MIL-type, 2-socket conn. to blunt cut termination
052AE020BZ	052 cable, 20-ft, environmentally sealed MIL-type, 2-socket conn. to blunt cut termination
052AE020BZ	052 cable, 20-ft, environmentally sealed MIL-type, 2-socket conn. to blunt cut termination
052AE030BZ	052 cable, 30-ft, environmentally sealed MIL-type, 2-socket conn. to blunt cut termination
052AE050BZ	052 cable, 50-ft, environmentally sealed MIL-type, 2-socket conn. to blunt cut termination
052BQ010AC	052 cable, 10-ft, composite MIL-type, 2-socket conn., right angle to BNC plug
052BQ010BZ	052 cable, 10-ft, composite MIL-type, 2-socket conn., right angle to blunt cut termination
052BQ010BZ	052 cable, 10-ft, composite MIL-type, 2-socket conn., right angle to blunt cut termination
052BQ020BZ	052 cable, 20-ft, composite MIL-type, 2-socket conn., right angle to blunt cut termination
052BQ030BZ	052 cable, 30-ft, composite MIL-type, 2-socket conn., right angle to blunt cut termination
052BQ030BZ	052 cable, 30-ft, composite MIL-type, 2-socket conn., right angle to blunt cut termination
052BQ050BZ	052 cable, 50-ft, composite MIL-type, 2-socket conn., right angle to blunt cut termination
052BR005AC	052 cable, 5-ft, composite MIL-type, 2-socket conn., straight to BNC plug
052BR010AC	052 cable, 10-ft, composite MIL-type, 2-socket conn., straight to BNC plug
052BR010AC	052 cable, 10-ft, composite MIL-type, 2-socket conn., straight to BNC plug
052BR010BZ	052 cable, 10-ft, composite MIL-type, 2-socket conn., straight to blunt cut termination
052BR020AC	052 cable, 20-ft, composite MIL-type, 2-socket conn., straight to BNC plug
052BR020BZ	052 cable, 20-ft, composite MIL-type, 2-socket conn., straight to blunt cut termination
052BR030AC	052 cable, 30-ft, composite MIL-type, 2-socket conn., straight to BNC plug
052BR030BZ	052 cable, 30-ft, composite MIL-type, 2-socket conn., straight to blunt cut termination
052BR050BZ	052 cable, 50-ft, composite MIL-type, 2-socket conn., straight to blunt cut termination
052BR100BZ	052 cable, 100-ft, composite MIL-type, 2-socket conn., straight to blunt cut termination
052BR150BZ	Cable
052FV005CV	CSI data collector interface polyurethane cable, 5-ft, 2-pin MIL lockable environmental boot to 25-pin
052LV001AC	2-cond. twisted/shielded pair, polyurethane jacket cable, 1-ft, 3-socket jack, quick disconnect conn. to BNC plug
053AE010BZ	053 cable, 10-ft, environmentally sealed MIL-type, 2-socket conn. to blunt cut termination
053AE020BZ	053 cable, 20-ft, environmentally sealed MIL-type, 2-socket conn. to blunt cut termination
053AE030BZ	053 cable, 30-ft, environmentally sealed MIL-type, 2-socket conn. to blunt cut termination
053BR020BZ	053 cable, 20-ft, composite MIL-type, 2-socket conn., straight to blunt cut termination
053BR030BZ	053 cable, 30-ft, composite MIL-type, 2-socket conn., straight to blunt cut termination
053BR050BZ	053 cable, 50-ft, composite MIL-type, 2-socket conn., straight to blunt cut termination
053BR100BZ	053 cable, 100-ft, composite MIL-type, 2-socket conn., straight to blunt cut termination
059AN010BZ	4-conductor polyurethane cable, 10 ft., 4-socket MIL-type conn. w/strain relief to blunt cut termination
059AN010NF	4-cond. twisted/shielded pair, polyurethane jacket cable, 10-ft, 4-socket MIL-type MS3116 connector to triple-splice assembly to (3) BNC plugs, shield grounded
059AN020BZ	4-conductor polyurethane cable, 20 ft., 4-socket MIL-type conn. w/strain relief to blunt cut termination
059AN030BZ	4-conductor, shielded, polyurethane jacket cable, 30-ft, 4-socket MIL-type MS3116 connector to blunt cut
059QH010BZ	4-conductor, shielded, polyurethane jacket cable, 10 ft, 4-socket M12 connector (pinouts for triaxial accelerometer), blunt cut
059QH020BZ	4-conductor, shielded, polyurethane jacket cable, 20 ft, 4-socket M12 connector (pinouts for triaxial accelerometer), blunt cut
059QH030BZ	4-conductor, shielded, polyurethane jacket cable, 30 ft, 4-socket M12 connector (pinouts for triaxial accelerometer), blunt cut
060A03	Clamp nut, 5/16-24-2A thd, 1/4" hex, SS (for Series 111, 112 & 113)
060A05	Clamp nut, M7 x 0.75-6G thd (for Series M111, M112 & M113)
060A10	Clamp nut, 1/2-20-2A thd, 7/16" hex (for Model 103B01, 103B02, 103B11 and 103B12)
060A11	Acetal clamp nut, 3/4-16-2A thd, 3/4" hex (for Model 106B50)
060A12	Clamp nut, 9/16-18-2A thd, 9/16" hex (for Models 106B & 116B)
060A14	Metric clamp nut, M14 x 1.25-6G thd, 14 mm hex, SS (for Models M106B & M116B)
060A20	Clamp nut, M5 x 0.80-6G thd, 1/4" hex (for Model M105A)
060A28	Clamp nut, 1/4-28, 1/4" hex (for Model 132A31 and 132A35)
060A53	Knurled clamp nut (for Model 106B to fit in Model 061A13)
060A54	Knurled clamp nut (for Model 106B05 to fit in Model 061A14)
060A59	Clamp nut, 20mm hex, M18x1.5 threads, For 176A06
061A01	Mounting adaptor, 3/8-24 external thd to 5/16-24 internal thd, 17-4 SS (for Series 111, 112 & 113)
061A10	Mounting adaptor, M10 x 1.0 external thd to 5/16-24 internal thd (config to metric 61), 17-4 SS
061A13	Coupling adaptor (for Model 106B & Series 116B on Pistonphone)
061A14	Coupling adaptor (for Model 106B50 on Pistonphone)
061A59	Mounting adaptor, 3/8-24 external thd to 5/16-24 internal thd, Acetal (for Series 111, 112 & 113)
062A01	Pipe thread adaptor, 1/8-27 NPT w/ 5/16-24 internal thd (for Series 111, 112 & 113)
064B06	Water-cooled adaptor, sensor recess mount, M20 x 1.50 thd, 1.25" hex (for Models 106B,116B & 116B03)
065A02	Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass (for Series 111A, 112A & 113A)
065A03	Seal ring, 0.435" OD x 0.377" ID x 0.030" thk, brass (for Series 101 and 102, and Model 061A01)
065A05	Seal sleeve, sensor recess mount, 0.248" OD x 0.221" ID x 0.240" thk, 17-4 SS (for Series 111A, 112A & 113A)
065A08	Isolation ring, 0.250" OD x 0.218" ID x 0.027" thk, anodized aluminum
065A09	Seal ring, 0.560" OD x 0.500" ID x 0.060" thk, brass (for Series 124A)
065A10	Seal ring, 0.138" OD x 0.101" ID x 0.022" thk, brass (for Model 105A)
065A15	Seal, 0.624" OD x 0.553" ID x 0.080" thk, brass (for Series M121Axx & 123A)
065A19	Spacer set, 0.250" ID (for conformal Models 117B01-117B65 & 117B101-117B999)
065A22	Seal, 0.250" OD x 0.218" ID x 0.015" thk, Torlon (for Series 111, 112 & 113)
065A27	Spacer set, 0.196" ID (for conformal Models 117B66-117B100)
065A36	Seal, 0.687" OD x 0.625" ID x 0.060" thk, Acetal (for Model 106B5X)
065A38	Seal sleeve, 0.138" OD x 0.101" ID x 0.105" thk, brass (for Model 105A)
065A40	Seal ring, 0.435" OD x 0.397" ID x 0.030" thk, brass (for Series M101 and M102, and Models 061A07 & 061A10)
065A44	Seal ring, 0.435" OD x 0.377" ID x 0.030" thk, Cu (for Model 102A10)
065A66	Adhesive mounting ring (for Series 103B)
065A71	Silver plated seal, For 176A06
065A72	Replacment cooling tubes, set of 2 each, with o-rings, for series 123B
066A17	Plug for 115A04 Combustion Pressure Sensor
076A05	Microdot connector, screw-on type (for use w/crimping tool Model 076A25)
076A25	Pin insertion tool (for use with Model 076A05 and EB 10-32 plugs)
076C31	10-32 plug connector kit, includes crimping tool and (20) coaxial conn. (EB type)
081A94	Mounting screw, 6-32 UNC, 0.75" long
100A05	Pressure sensor kit, three 113B21, one 113B22PBO and four 061A59
100A06	Pressure sensor kit, three 113B26, one 113B22PBO and four 061A59
100A07	Pressure sensor kit, three 113B27, one 113B22PBO and four 061A59
100A08	Pressure sensor kit, three 113B28, one 113B22PBO and four 061A59
100A21	Pencil probe kit, 3 each 137B21B and 1 each 137BPBO
100A22	Pencil probe kit, 3 each 137B22B, 1 each 137BPBO
100A23	Pencil probe kit, 3 each 137B23B, 1 each 137BPBO
100A24	Pencil probe kit, 3 each 137B24B, 1 each 137BPBO
100A25	Dual pencil probe kit, 3 each 137B25, 1 each 137B32, 4 each 010AY005QM
102M206	Intrinsic safe ICP® pressure sensor, 50 psi, 100 mV/psi, ground isolated, 10-32 connector, temp to 250F
112A05	High temperature (+600 F/+315 C) pressure probe, 5000 psi, 1 pC/psi, 0.218" dia. SS diaphragm, accel. comp., 5-point cal ranges at 5kpsi, 500psi and 100psi
113B22PBO	High frequency ICP® pressure sensor placebo version of Model 113B22
113M231	High frequency CVLD pressure sensor, 100 psi, 50 uA/psi, acceleration compensated, 20 ft. integral coax cable, blunt cut, hydrotested
117B13	Conformal ballistics pressure sensor, 357 Magnum, 357 Maximum, 357 Remington Maximum, 38 Long Colt, 38 Short Colt, 38 Special, 380 Auto (ACP), and 7.62 Tokarev caliber
117B184	Conformal ballistics Pressure Sensor for 40 Smith & Wesson and 10mm AUTO (45 kpsi range, 15 kpsi offset)
117B22	Conformal pressure sensor, 7mm Rem Mag , 300 Win Mag, 264 Win Mag, 458 Win Mag, 338 Win Mag, 45-70 Govt, 416 Rem Mag, 458 Lott, 30-338, 7mm STW, 450 Marlin, 375 Weatherby
117B25	Conformal ballistics pressure sensor, 356 T S & W, 9 mm, 9 mm Largo, 9 mm Luger, and 9 mm Win magnum caliber cartridges
117B30	Conformal ballistics Pressure Sensor for 223 Remington (5.56 x 45) and 5.56 NATO
117B31	Conformal ballistics pressure sensor, 25-06 Rem, 270 Win, 280 Rem (7 mm Rem Exp), 30-06, 30-06 Springfield, 338-06 A-square, 35 Whelen, and 405 Win caliber cartridges
117B39	Conformal ballistics pressure sensor, 45 Auto & 45 ACP, 45 Auto RIM, 45 Win Mag, 7.5 X 55 Suisse, 45 AR, 45 Glock (AKA 45 GAP ATK/CCI Sporting), 45 Glock (Win)
117B44	Conformal ballistics pressure sensor, 243 Win, 260 Rem, 30-07, 308 Win (7.62 x 51 NATO), 338 Federal, 358 Win, 375 JDJ, 38-40 Winc, 44 S & W Special, 444 Marlin, 7.5 x 54
117B66	Conformal ballistics pressure sensor, 22 LR, 22 Short, 22 LR Shot, 17 Mach 2, 17 HLR
117B67	Conformal ballistics pressure sensor, 22 WMRF, 22 WRF, 22 WRF WITH 0.50" Centerline, 17 RF Mag, 17 HMR
137B32	Quartz, free-field, ICP® blast pressure pencil probe, front sensor is 250 psi, 20 mV/psi, rear sensor is a placebo, 4-pin connector
137BPBO	Quartz, free-field, ICP® blast pressure pencil probe placebo version of 137B23B, BNC jack connector