PCB Piezotronics / IMI Sensors 국내총판대리점 - 케이티엠엔지니어링

PCB Piezotronics / IMI Sensors 국내총판대리점 - 케이티엠엔지니어링

PCB Piezotronics / IMI Sensors Domestic Distributor - KTM Engineering

PCB Piezotronics / IMI Sensors Exclusive distributor in Korea - KTM Engineering

​

산업용 센서 / 진동센서 / 진동엔지니어링 / PCB진동센서 / PCB가속도센서 / PCB사진진동센서 / PCB사가속도센서 / IMI진동센서 / IMI가속도센서 /

TMS진동캘리브레이터 / TMS Proximity Transducer Calibrator / TMS Portable Vibration Calibrator

-> 케이티엠엔지니어링이 정식 한국대리점입니다.

​

PCB Piezotronics의 사업부인 IMI Sensors, THE MODAL SHOP 은 가속도계, 진동 트랜스미터 및 진동캘리브레이터 같은 산업용 진동 모니터링 기기의 글로벌 설계 및 제조업체입니다.

​

국내독점 정식대리점에서 고객 맞춤 서비스를 제공하여 드립니다.

​

진동, 변위, 하중, 응력 (유, 무선) 측정 전문업체

​

​

(주)케이티엠엔지니어링

전화: 031-628-6078

메일: dyk@ktme.com ｜홈페이지: http://www.ktmeng.com

주소: 경기도 성남시 분당구 대왕판교로 670 유스페이스2 B동 808호

 

9155D-ComputerR	Rack mounted computer for 9155 Accelerometer Calibration Workstation
9155-INST	Installation and Training (daily rate)
9155-MNT01	Calibration System Mounting Adaptor. For Sensors with triangular hole patterns on 1.20" diamter circle. Uses an 8-32 mounting thread. Includes 3 mounting scews. For use on 10-32 and 1/4-28 shakers PD-1159
9155-MNT02	Calibration System Mounting Adaptor, for sensors with triangular hole patterns on a 1.00" diameter circle. Uses a 4-40 mounting thread. Includes mounting screws. For use on 10-32 and 1/4-28 shaker inserts.
9155-MNT03	Calibration System Mounting Adaptor, for sensors with square hole patterns on a 1.375" diameter circle. Uses a 6-32 mounting thread. Includes mounting screws. For use on 10-32 and 1/4-28 shaker inserts.
9155-MNT04	Calibration System Mounting Adaptor for sensors with 2 or 4 holes on a 0.73" diameter circle. Uses a 4-40 mounting thread. Includes mounting screws. For use on 10-32 and 1/4-28 shakers
9155-MNT05	Calibration System Mounting Adaptor. For sensors with 5-40 integral studs. For use on 1/4-28 shakers only
9155-MNT06	Calibration Adaptor 1/4-28 ti 10/32 female PD-1157
9155-MNT07	Calibration System Mounting Adaptor. For adhesive mount sensors. For use on 1/4-28 shakers only
9155-MNT08	Calibration System Mounting Adaptor. For Sensors with 6-32 through hole mounting. Includes mounting screws. For use on 1/4-28 Shakers Only. PD-1175
9155-MNT09	Calibration System Mounting Adaptor. For Sensors with 4-40 through hole mounting. Includes mounting screws for use pn 1/4-28 shakers only.
9155-MNT10	Calibration System Mounting Adaptor. For sensors with 4-48 through hole mounting. For use on 1/4-28 shakers only.
9155-MNT11	Calibration System Mounting Adaptor. For sensors with 2 or 4 holes on a 0.375" diameter circle. Uses a 4-40 mounting thread. Includes mounting screws. For use on 10-32 and 1/4-28 shaker. PD-1173
9155-MNT12	Cliabration System Mouninng Adaptor. Fr use with sensors with 2 or 4 holes on 0.48"mounting. Uses and a 2-56 mounting thread. Includes mounting scews. For usen
9155-MNT13	Calibration System Mounting Adaptor. For sensors with triangular mounting holeswith a 0.75" base height. Uses a 4-40 mounting hole. Includes mounting screws. For use on a 10-32 & 1/4-28 shaker.
9155-MNT14	Calibration System Mounting Adaptor. For Sensor w/2-56 through hole mounting. Includes mounting screws. For use on 1/4-28 shakers only. PD-1183
9155-MNT15	Calibration System Mounting Adaptor. For Sensors with 2 or 4 holes on a 0.825" diameter circle. Uses 4-40 mounting threads. Includes mounting screws. For use on 10/32/ and 1/4-28 shakers.
9155-MNT16	Calibration System Mounting Adaptor. For Sensors with 2 or 4 holes on a 0.27" diameter circle. Uses 0-80 mounting threads. Includes mounting screws. For use on 10/32/ and 1/4-28 shakers.
9155-MNT17	Calibration System Mounting Adaptor. Designed for RD298 ShockLog (TM) recorder and UD 5PM shaker. Includes internal accelerometer and mounting bolts.
9155-MNT18	Calibration System Mounting Adaptor. For Sensors with 2 or 4 holes on 0.300 diamter circle. Uses a 0-80 mounting thread. Includes mounting screws for use on 10/32 and 1/4-28 references. PD-1194
9155-MNT19	Calibration System Mounting Adaptor. For sensors with triangular hole pattern on a 1.190"(30.2mm) diameter circle. Uses and M4 mounting thread. Includes 3 mounting screws. For use on 10-32 or 1/4-28 shakers. PD-1219
9155-MNT20	Calibration System Mounting Adaptor. For sensors with M3 integral studs. For use on 1/4-28 shakers only. PD-1221-01
9155-MNT21	Calibration System Mounting Adptor. For sensors w/ 2 or 4 holes on a 0.500" diameter circle . Uses a 3-48 mounting thread. Includes mounting scres. OF ruse on a 10/32 and 1/7-28 shaker.
9155-MNT22	Calibration System Mounting Adaptor, for use with 2 or 4 hole on a 0.93"diameter circle. Uses a 4-40 mounting thread. Includes mounting screws. For use on 10-32 and 1/4-28 shaker
9155-MNT23	Calibration System Mounting Adapator . For Sensors with triangular pattern on a 1.56" diamaeter circle. Uses 1/4-20 mounting thread. For use on 10-32 and 1/4-28 shakers
9155-MNT25	Cal System Mounting Adaptor. For Calibration of 3503A2020K surface mount triaxial accelerometers.
9155-MNT26	Calibration System Mounting Adaptor. For Calibration of PCB 3501A20x0KG single axis leadless accelerometers.
9155-MNT27	Calibration System Mounting Adaptor. For Calibration of PCB 3503A1020KG triaxial accelerometer.
9155-MNT28	Calibration Mounting Adaptor. 1/4-28 thread with integral reference accelerometer and paired ICP conditioner. Includes 9101C Mounting Accessory Kit and mounting holes for sensors with a triangular hole pattern on a 1.52" diameter circle. PD-1422
9155-MNT28/442	Spare Reference Accelerometer Set For High Payload Shakers. 1/4-28 UNF Mounting Thread. 442 Series Signal Conditioner, Laser Primary Calibration, and data on disk
9155-MNT28/482	Calibration System Mounting Adaptor. 1/4-28 thread with integral reference accelerometer and paired 482A21 ICP® conditioner. Includes 9101C Mounting Accessory Kit and mounting holes for sensors with a triangular hole pattern on a 1.52” diameter circle.
9155-MNT28/482	Spare Reference Accelerometer Set For High Payload Shakers. 1/4-28 UNF Mounting Thread. 482 Series Signal Conditioner, Laser Primary Calibration, and data on disk
9155-MNT28S/442	Spare Reference Accelerometer Set For High Payload Shakers. 1/4-28 UNF Mounting Thread. 442 Series Signal Conditioner, Secondary Transfer Calibration, and data on disk
9155-MNT28S/482	Spare Reference Accelerometer Set For High Payload Shakers. 1/4-28 UNF Mounting Thread. 482 Series Signal Conditioner, Secondary Transfer Calibration, and data on disk
9155-MNT29/442	Spare Reference Accelerometer Set For High Payload Shakers. 1/4-28 UNF Mounting Thread. 442 Series Signal Conditioner, Laser Primary Calibration, and data on disk
9155-MNT29/482	Calibration System Mounting Adaptor. 1/4-28 thread with integral reference accelerometer and paired 482A21 ICP® signal conditioner. Includes 9101C Mounting Accessory Kit.
9155-MNT29/482	Spare Reference Accelerometer Set For High Payload Shakers. 1/4-28 UNF Mounting Thread. 482 Series Signal Conditioner, Laser Primary Calibration, and data on disk
9155-MNT29S/442	Spare Reference Accelerometer Set For High Payload Shakers. 1/4-28 UNF Mounting Thread. 442 Series Signal Conditioner, Secondary Transfer Calibration, and data on disk
9155-MNT29S/482	Calibration System Mounting Adaptor. 1/4-28 thread with integral reference accelerometer and paired 482A21 signal conditioner. Includes 9101C Mounting Accessory Kit. Secondary Calibration
9155-MNT29S/482	Spare Reference Accelerometer Set For High Payload Shakers. 1/4-28 UNF Mounting Thread. 482 Series Signal Conditioner, Secondary Transfer Calibration, and data on disk
9155-MNT30	Calibration System Mounting Adaptor. 1/4-28 male to adhesive surface. Adaptor is a hexagon with 1.58" from corner to opposite corner.
9155-MNT31	Calibration Adaptor 1/4-28 male to M2.5 female PD-1971
9155-MNT32	Mounting Stud Adaptor. Converts 1/4-28 to 10-32 threaded hole. Set of 3 (6264) adaptors.
9155-MNT33	Mounting Stud Adaptor. Converts 1/4-28 to 5-40 threaded hole. Set of 3 adaptors. PD-1156
9155-MNT34	Calibration System Mounting Adaptor. For sensors with square or side hole patterns ona 9mm diameter circle. Uses an M1.6 mounting thread. Includes mounting screws. For use on 1/4-28 and 10-32 shakers.
9155-MNT35	Calibration Mounting Adaptor. 1/4-28 male to M6 x 0.75 female.
9155-MNT36	Calibration System Mounting Adaptor. Custom adaptor per drawing provided by HAL. 4 mounting holes in asymmetric locations. Adaptor is made of a non-conductive material.
9155-MNT37	Calibration System Mounting Adaptor. For sensors with a square hole pattern on a 22.6mm diameter circle. Uses an M2.5 mounting thread. Includes mounting screws. For use on 1/4-28 and 10-32 shakers. Adaptor is non-conductive.
9155-MNT38	Mounting Stud Adaptor. Converts 1/4-28 to 6-32 threaded hole. Set of 3 adaptors.
9155-MNT39	Calibration System Mounting Adaptor. For calibration of Vibro-meter CA119M-01. Not for use above 300 Hz.
9155-MNT41	Calibration adaptor 10-32 male to adhesive surface. 1" hex
9155-MNT42	Calibration System Mounting Adapter, for calibration of Dytran 3232A1 biaxial accelerometer. For use with either 10-32 or 1/4-28 reference standards.
9155-MNT43	Calibration System Mounting Adapter for sensors with 1/4"-18 NPT integral stud to 1/4-28 male for Modal Shop portable vibration calibrators.
9155-MNT43	Calibration System Mounting Adapter for sensors with 1/4"-18 NPT integral stud to 1/4-28 male for Modal Shop portable vibration calibrators.
9155-MNT44	Calibration System Mounting Adapter, for calibration of Kistler 8793 series triaxial accelerometers. Mounting for X and Y axes only. For use with either 10-32 or 1/4-28 reference standards. PD-1663 and PD-1664
9155-MNT45	Mounting Adaptor. 1/4-28 UNF male to 10-32 UNF female. Thick mounting adaptor for sensors with short (~1/8") 10-32 integral stud.
9155-MNT46	Calibration Adaptor. For sensors with M10x1.5 integral studs. For use on reference sensors with 1/4-28 mounting hole PD-3255
9155-MNT47	Calibration System Mounting Adaptor. For use on sensors with 2 or 4 holes on a 0.707" diameter circle. Uses a 0-80 mounting thread. Includes mounting screws. For use on 10-32 and 1/4-28 shakers.
9155-MNT48	Calibration System Mounting Adapter, for calibration of Crossbow LP Series triaxial accelerometers. Mounting for X and Y axes only. For use with either 10-32 or 1/4-28 reference standards.
9155-MNT49	Calibration System Mounting Adaptor. For use on sensors with 2 or 4 holes on a 1.09" diameter circle. For use on 10-32 and 1/4-28 shakers.
9155-MNT51	Calibration System Mounting Adaptor. For sensors with two mounting holes on an 11.1mm diameter circle. Uses an M3 mounting thread. Includes mounting screws. For use on 10-32 and 1/4-28 shakers.
9155-MNT52	Calibration System Mounting Adaptor. For sensors with 8-32 through hole mounting. Includes mounting screws. For use on 1/4-28 shakers only.
9155-MNT53	Calibration System Mounting Adaptor. For sensors with two mounting holes on a 0.83" diameter circle. Uses a 2-56 mounting thread. Includes mounting screws. For use on 10-32 and 1/4-28 shakers.
9155-MNT54	Calibration Mounting Stud Adaptor. Converts 10-32 to 2-56 threaded hole. Set of 3 adaptors.
9155-MNT55	Calibration System Mounting Adapter, for calibration of sensors with 2 or 4 moutning holes on a 0.300" diameter circle that measure in the horizontal direction. Uses 0-80 mounting screws. For use with 10-32 or 1/4-28 references.
9155-MNT56	Calibration System Mounting Adaptor. For sensors with square hole patterns on a 11.31mm diameter circle. Uses an M1.6 x 8mm mounting thread. Includes mounting screws. For use on 10-32 and 1/4-28 shakers.
9155-MNT57	Calibration System Mounting Adapter, for calibration of sensors with 2 or 4 M1.6 threaded moutning holes on a 9mm diameter circle that measure in the horizontal direction. For use with 10-32 or 1/4-28 references. PD-2438
9155-MNT58	Calibration System Mounting Adaptor. For sensors with a 2 or 4 threaded M1.6 hole patterns on a 9mm diameter circle. Uses an M1.6 x 8mm mounting thread. Includes mounting screws and nuts. For use on 10-32 and 1/4-28 shakers.
9155-MNT59	Calibration System Mounting Adaptor. For sensors with M4x10 integral studs. For use on 1/4-28 shakers only.
9155-MNT60	Calibration System Mounting Adaptor. For sensors with M8 integral studs. For use on 1/4-28 shakers only.
9155-MNT61	Triaxial low frequency mounting adaptor for a Systron Donner Motion Pak. See PD-2150, PD-2171 (-01 and-02)
9155-MNT62	Mounting adaptor with four 6-32 threaded holes equally spaced on 1.375" bolt circle diameter.
9155-MNT63	Calibration System Mounting Adaptor. For sensors with a 2 or 4 threaded hole patterns on a 0.671" diameter circle. Uses a 6-32 mounting thread. Includes mounting screws and nuts. For use on 10-32 and 1/4-28 shakers
9155-MNT64	Calibration System Mounting Adaptor. For sensors with 6 holes equally spaced on a 30.3 mm diameter circle. Uses M4 mounting threads. Includes mounting screws and hex wrench. For use on 10-32 and 1/4-28 shakers.
9155-MNT65	Calibration Adaptor. For sensors with M10x1.5 integral studs. For use on reference sensors with 1/4-28 mounting holes.
9155-MNT66	Mounting plate for affixing 080A199/080A200 reference standard to non air-bearing shakers. The mounting plate includes a 10-32 tapped hole for interfacing to the shaker.
9155-MNT67	Calibration System Mounting Adaptor. For sensors with M8x1.0 integral studs. For use on 1/4-28 shakers only. PD-2040
9155-MNT68	Calibration Mounting Adapter. Mounts 301M26 to 2075E Shaker.
9155-MNT70	Calibration System Mounting Adaptor. For use on sensors with 2 or 4 holes on a 1.50" diameter circle. For use on 10-32 and 1/4-28 shakers.
9155-MNT71	Adapter for DJ Birchall A220V. Includes mounting screws.
9155-MNT72	Calibration Mounting Adaptor For Certain PCB Model Y3503A Series Triaxial Shock Accelerometers. Includes Mounting Screws. For Mounting to 1/4-28 Reference Accelerometers PD-2047 PCB# 42238-01
9155-MNT73	3/8-24 to 1/4-28 mounting stud for mounting Bently Nevada velometers to Modal Shop shakers
9155-MNT74	Mounting adapter with four threaded holes equally spaced on 22.9mm bolt circle diameter. Includes mounting screws and hex wrench. PD-2263
9155-MNT75	Calibration system mounting adaptor, 1/4-20 male to 1/4-28 male stud.
9155-MNT76	Low Frequency Reference Standard for 2075E Flexure Shaker. Includes calibrated reference standard and mounting accessory kit. Operating frequency range: 2 Hz to 2k Hz.
9155-MNT77	Calibration System Mounting Adaptor. For PCB 3641 and 3651 series accelerometers. For use on 10-32 and 1/4-28 references PCB# 20074-04.
9155-MNT78	Alignment fixture for tri-axial sensors measuring 0.40 inches on each side. For use with 080A199 and 080A200 reference standards only PD-2616-02
9155-MNT79	Calibration System Mounting Adapter. For sensors with M5x0.5 integral studs. For use on 1/4-28 shakers only. Adapter will limit upper calibration frequency range.
9155-MNT80	Mounting adaptor for B&K 4808 shaker. Adapts top plate of shaker to center 10-32 mounting hole used with back-to-back reference standards.
9155-MNT81	Calibratoin Adapter for PCB 354C03 accelerometer. Used to calibrate the X and Y axes.
9155-MNT82	Calibration adaptor, 5/16"-18 UNC female thread to 1/4-28 male for mounting Pruftechnik sensors to portable vibration calibrators. Amazon # G1069
9155-MNT83	Mounting block with locator holes for calibration of circular industrial triaxial accelerometers with 10-32 thru bolt mounting. Mounts to portable vibration calibrator and air bearing shaker via 1/4-28 holes on sides.
9155-MNT85	Seismoprobe calibration mouting pad: 1/2-20 to 3/8-24. Used in conjunction with model 9155- MNT73 3/8-24 to 1/4-28 mounting stud to mount moving coil Seismoprobes onto 1/4-28 shakers.
9155-MNT86	Calibration system mounting adaptor, 1/2" NPT female to 1/4-28 male.
9155-MNT86	Calibration system mounting adaptor, 1/2" NPT female to 1/4-28 male.
9155-MNT87	Calibration system mounting adaptor, 3/8-24 UNF female to 1/4-28 male Metrix part# 8841-0118
9155-MNT88	Calibration system mounting plate for high-temp square bolt pattern sensors with holes 25mm apart on all sides and M6x1 threads, 10-32 center hole.
9155-MNT89	Calibration system mounting plate for high-temp square bolt pattern sensors with holes 30mm apart on all sides and M6x1 threads, 10-32 center hole
9155-MNT92	Calibration System Mounting Adaptor. For sensors with a 3/8-16 UNF male mounting thread. For use on ¼-28 shakers.
9155-MNT93	Seismoprobe calibration mouting pad: 1/2-20 F to 1/4-28 F. Uses 1/4-28 stud to mount moving coil Seismoprobes onto 1/4-28 shakers. Model 081B20 1/4-28 stud supplied with all portable vibration calibrators.
9155-MNT99	Calibration system mounting adaptor for Emerson PR9268/20X or PR9268/30X
9155-SC	1 Year Service Contract for Calibration Systems. Covers on-site re-calibration of all required components, software upgrades, additional training and extended warranty of all system components.
9155-SC3	3 Year Service Contract for Calibration Systems. Covers on-site re-calibration of all required components, software upgrades, additional training and extended warranty of all system components.
9155-SCP	1 Year Primary Service Contract for Calibration Systems. Includes primary recal of ref. standards, standard recal of other installed equipment, software upgrades, additional training and extended warranty of all system components
9155-SCP3	3 Year Primary Service Contract for Calibration Systems. Includes primary recal of ref. standards, standard recal of other installed equipment, software upgrades, additional training and extended warranty of all system components
9155-SP1	1 Year Service Plan for 9155 System. Covers calibration of all required components, calibration of verification sensor(s), software upgrades, additional training and extended warranty of all system components for the length of the contract.
9155-SP3	3 Year Service Plan for 9155 System. Covers calibration of all required components, calibration of verification sensor(s), software upgrades, additional training and extended warranty of all system components for the length of the contract.
9155-SPP1	1 Year Primary Service Plan for Calibration Systems. Includes primary recal of ref. standards, standard recal of other installed equipment, software upgrades, and extended warranty of all system components
9155-SPP3	3 Year Primary Service Plan for Calibration Systems. Includes primary recal of ref. standards, standard recal of other installed equipment, software upgrades, and extended warranty of all system components
9155-SW	9155 Software Version Upgrade For 1 Major Version Increment. For example, from Version 6.x.x to Version 7.x.x.
9200-CAL01	Calibration of 9200 Series Low Frequency Portable Vibration Calibrator. NIST traceable.
9200-CAL01	Calibration of 9200 Series Low Frequency Portable Vibration Calibrator. NIST traceable. A2LA accredited.
9200D	Low Frequency Portable Shaker Table. Calibrates vibration transducers with adjustable frequency range (0.7 Hz - 2 kHz) and amplitude settings. LCD readout in English or metric units.
9210D	Low Frequency Portable Vibration Calibrator. Calibrates vibration transducers with adjustable frequency range (0.7 Hz to 2 kHz) and amplitude settings. Features ICP power, LCD readout, internal memory & flash drive.
9350C	Precision Acoustic Calibration Workstation, turnkey automated cal system, performs traceable calibrations on mics, preamps and sound sources from 20-100,000Hz. Includes acoustic test chamber for convenient mounting and reduction of background noise.
9350C-SC	Service contract for 9350C Software. Contract includes free software upgrades for one year after purchase.
9520D	Dynamic Decisions Modal Handbook (interactive CD), by Pete Avitable. Contains basic training for the beginning modal practitioner as well as reference material for experimental modal analysis theory.
9525-ALP	Anvil Locking Plate for TMS 9525 series Pneushock calibrators. Includes rubber bumpers.
9525C	PneuShockTM pneumatic shock acceleration, 20g to 10,000g. Includes pneumatic actuator, electronic control unit and variety of impact anvils, and shock reference accelerometer set.
9525C Controller	PneuShock Controller. Rack mount unit regulates air pressure, pulse duration, and triggers projectile in Pneushock system.
9525C Exciter	PneuShock Actuator. Includes shock tower. Does not include reference accelerometer kit.
9525C-BPA	Barrel/projectile assembly for K9525C. Replacement part for worn assemblies. Includes qty. 2 projectiles.
9525C-PAD	Replacement Pads for 9525C Shock Calibration System. Includes a set of 20 of each type of pad.
9901C	Instrumented Shock Tube. Capable of pressure pulses of 1,000 psi (69 bar). Formerly offered as PCB Model 901A10.
9903-ADP001	Pressure Calibration System Adaptor. For adapting Kulite MIC-190 (0.437ö length) to TMS K9903C or PCB 903B02.
9903-ADP002	Pressure Calibration System Adaptor. For adapting Kulite MIC-190 (0.760ö length) to TMS K9903C or PCB 903B02.
9903-ADP003	Pressure Calibration System Adaptor. 10-32 thread 0.51ö from bottom seal. 0.10ö from seal to end of adaptor. For use with TMS K9903C or PCB 903B02.
9903-ADP004	Pressure Calibration System Adaptor (2 parts). For adapting PCB 103A11 to TMS K9903C or PCB 903B02.
9903-ADP005	Pressure Calibration System Adaptor. 9/16-18 thread 0.275" from bottom seal. 0.30" from seal to end of adaptor. For use with PCB 903B02 (TMS K9903 system).
9903-ADP006	Pressure Calibration System Adaptor. For adapting PCB 176 series pressure sensors to PCB 903B02 pressure calibrator.
9903-ADP007	Pressure Calibration System Adaptor. For adapting PCB 106B50 series pressure sensors to PCB 903B02 pressure calibrator.
9903-ADP008	Dynamic Pressure Calibration System Adaptor. For adapting PCB 116B pressure sensor to TMS 9903C series calibrators.
9903-ADP009	Calibration Mounting Fixture For Use With PCB 176M03 on Model 9903C series calibrators from TMS450
9903-ADP010	Calibration Mounting Fixture For Use With Vibro-Meter CP-232 on Model K9903C from TMS
9903-ADP011	Calibration Mounting Fixture For Use With Columbia Research 765M27 on Model K9903C from TMS.
9903-ADP012A	Calibration Mounting Fixture for Use With PCB Model 137B23B on Model K9903C from TMS
9903-ADP013	Calibration Mounting Fixture For With Select PCB Model 106 Series sensors on Model K9903C From TMS. Stainless Steel.
9903-ADP014	Calibration Mounting Fixture For With Select PCB Model 106 Series sensors on Model K9903C From TMS. Delrin.
9903-ADP015	Calibration Mounting Fixture For With Select PCB Model 113 Series sensors on Model K9903C From TMS. Delrin.
9903-ADP016	Calibration Mounting Fixture For With Select PCB Model 113 Series sensors on Model K9903C From TMS. Stainless Steel.
9903-ADP017	Calibration Mounting Fixture For With Endevco Model 8515 sensors on Model K9903C From TMS. Stainless Steel.
9903-ADP-018	Calibration Mounting Fixture For Use With Endevco 8530C Sensors On Model K9903C From TMS. Stainless Steel
9903-ADP019	Calibration Mounting Fixture For With Kulite XT-190L Series sensors on Model K9903C From TMS. Stainless Steel.
9903-ADP020	Calibration Mounting Fixture For With Kulite HKS-375 Series Sensors On Model K9903C From TMS. Stainless Steel.
9903-ADP021	Calibration Mounting Fixture For With Kulite LQ-080 and LQ-125 Series Sensors On Model K9903C From TMS.
9903-ADP022	Calibration Mounting Fixture For With XCW-190 Series Sensors On Model K9903C From TMS. (Sensor Manufacturer Not Confirmed).
9903-ADP023	Calibration Mounting Fixture For Use With Certain PCB Pressure Sensors with 1/8-27 NPT Mounting Thread on TMS Model K9903C.
9903-ADP024	Dynamic Pressure Calibration System Adaptor. For adapting PCB 116B03 pressure sensors among others to TMS 9903C Series
9903-ADP025	Calibration Mounting Fixture For Use With Certain Piezoelectric Blood Pressure Monitoring Sensors (Small Versio
9903-ADP026	Calibration Mounting Fixture For Use With Certain Piezoelectric Blood Pressure Monitoring Sensors (Large Version)
9903-ADP027	Calibration Mounting Fixture For Use With Vibro-Meter CP-103 (-7X Variations Only, With Protection Grid), on Model K9903M02 from TMS.
9903-ADP028	Calibration Mounting Fixture For Use With Vibro-Meter CP-103 (-5X, -6X, and -9X Variations Only, Without Protection Grid), on Model K9903M02 from TMS.
9903-ADP030	Calibration Mounting Fixture For Use With TMS 9903 Series. Qty. 5 Pressure ports with 3/8-24 UNF thread.
9903-ADP031	Calibration service for reference pressure gauge and meter used in 9155D-903
9903-ADP032	Calibration Mounting Fixture For Use With Endevco 8530 Series on 9903C series calibrators from TMS.
9903-ADP033	Calibration Mounting Fixture For Use With PCB 134A02 on 9903C series calibrators from TMS.
9903-ADP035	Calibration Mounting Fixture For Use With Vibro-Meter CP-237 on 9903C series from TMS. Please note that operation requires user access and user supplied cabling to the termination of the hardline sensor cable.
9903-ADP036	Calibration Mounting Fixture For Use With PCB Model 102M114 on 9903C series from TMS.
9903-ADP037	Calibration Mounting Fixture For Use With PCB 176M18 on Model K9903C from TMS.
9903-ADP038	Calibration Mounting Fixture For Use With PCB 106M131 and certain other sensors on Model K9903C from TMS
9903C	Dynamic Pressure Calibration Actuator. Capable of step pressure pulses of 150 psi (1 MPa) pulses with 5 millisecond rise time. Formerly Offered as PCB Model 903B02.
9903-REFKIT	Spare reference gauge and handheld meter for TMS 9903 series dynamic pressure calibration products. Contact TMS if First Generation Panel Meter Is Required.
9905-ADP001	Calibration Mounting Fixture For With Endevco 8511A Series Sensors On Model K9905C From TMS. Sensor Has 3/8-24 thread, and Diaphragm Protrusion of 0.567". Max Pressure 20 ksi.
9905-ADP002	Calibration Mounting Fixture For Use With Kistler 6215 Sensor On Model K9905C From TMS.
9905-ADP003	Calibration Mounting Fixture For Use With PCB Model 165B02 Sensor On Model K9905C From TMS.
9905-ADP004	High pressure calibration mounting adaptor. Mounts 167M02 or equivalent to 9905 series calibrators for 'oil' calibration.
9905-ADP005	High pressure calibration mounting adaptor. Mounts 117B66 or equivalent to 9905 series calibrators for 'oil' calibration.
9905-ADP006	Calibration Mounting Fixture For With Kistler Model 217C and 617C. Used on TMS 9905 series calibrators.
9905-ADP008	Calibration Mounting Fixture For With Kulite HKS-37-375. Used on TMS 9905 series calibrators. PD-3464
9905-ADP010	Calibration Mounting Fixture For Kulite XTEH-10L-190M. Used on TMS 9905 series calibrators.
9905D	High Pressure Calibration Actuator. Capable of step pressure loads of 80,000 psi (515 MPa).
9905D-CREF	Calibration service of reference gauge and meter. Nist Traceable
9905-OIL	Single gallon container of hydraulic oil used in 9905 series calibration systems. Includes MSDS.
9905-REFKIT	Spare reference gauge and panel meter for TMS 9905 series dynamic pressure calibration products. 100 ksi max range.
9907-ADP001	Pressure Calibration System Adaptor. Adapts PCB Model 132A36 Pressure Sensor For Mounting on Modal 9907C Series Calibrators.
9907-ADP002	Pressure Calibration System Adaptor. Adapts Endevco Model 8530B Series for Mounting ON 9907C Series Calibrators.
9907-ADP004	Calibration Mounting Fixture For With PCB "Sub-Miniature" Probe Sensors On Model K9907C From TMS. Sub-Mini Probe Style Has Diameters 0.099"/0.140" for Diaphragm/Mounting Shoulder With 0.100" Protrusion
9907-ADP006	Calibration Mounting Fixture For Use With PCB 138M184 on TMS Model K9907C Series Calibrators
9907-ADP008	Calibration Mounting Fixture For Use With Certain Pressure Sensors on 9903C series calibrators from TMS.
9907-ADP009	Calibration Mounting Fixture For With PCB 134A02 On 9907C Series From TMS.
9907-ADP011	Calibration Mounting Fixture For With Kulite EWCTV-312 Series On 9907C Series From TMS.
9907-ADP014	Calibration mounting fixture for use with sensors with G-1/4"-19 BSPP external mounting thread
9907-ADP015	Calibration mounting fixture for use with sensors with M10x1.0 mounting thread external mounting thread (PCB M102 series).
9907-ADP018	Calibration mounting fixture for use with M109C12 sensors
9907-ADP019	Calibration mounting fixture for use with 108A02 sensors
9907C	Dynamic pressure calibration actuator. Capable of step pressures pulses of 1,000 psi (6.89 MPa) with 30 microsecond rise time. Formerly offered as PCB Model 907A07.
9907-PVS	Poppet Valve Stem Assembly Used On Model 9907 Series Calibrators.
9907-REFKIT	Spare reference gauge and handheld meter for TMS 9907 series dynamic pressure calibration products.
9913C	Hydraulic impulse calibrator system, 200 psi to 20,000 psi. Includes PCB 913B02 exciter and 136A tourmaline standard.
9913-MNT004	Calibration Mounting Fixture For With Kulite XT-190L Series sensors on Model K9913C From TMS. Stainless Steel.
9913-MNT005	Calibration Mounting Fixture For With Kulite HKS-375 Series Sensors On Model K9913C From TMS. Stainless Steel.
9913MNT006	Calibration Mounting Fixture For With Kulite LQ-080 and LQ-125 Series Sensors On Model K9913C From TMS.
9913-MNT006	Calibration Mounting Fixture For With Kulite LQ-080 and LQ-125 Series Sensors On Model K9913C From TMS.
9913-MNT007	Calibration Mounting Fixture For With XCW-190 Series Sensors On Model K9913C From TMS. (Sensor Manufacturer Not Confirmed).
9913-MNT008	Calibration Mounting Fixture For With PCB "Sub-Miniature" Probe Sensors On Model K9913C From TMS. Sub-Mini Probe Style Has Diameters 0.099"/0.140" for Diaphragm/Mounting Shoulder With 0.100" Protrusion
9913-MNT009	Calibration Mounting Fixture For With HKL-AC-375 Sensors On Model K9913C From TMS. Sensor Has 3/8-24 thread, and Diaphragm Protrusion of 0.43"
9913-MNT01	K9913C adaptor for Vibro Meter CP211 Piezoelectric Pressure Sensor
9913-MNT010	Calibration Mounting Fixture For With Endevco 8511A Series Sensors On Model K9913C From TMS. Sensor Has 3/8-24 thread, and Diaphragm Protrusion of 0.567"
9913-MNT011	Calibration Mounting Fixture For With Endevco 8530BM37 Sensors On Model K9913C From TMS. Sensor Has 10-32 thread, and Diaphragm Protrusion of 0.438"
9913-MNT012	Calibration Mounting Fixture For With PCB 109C11 On Model K9913C From TMS
9913-MNT013	Calibration Mounting Fixture For With PCB 134A02 On Model K9913C From TMS.
9913-MNT014	Calibration Mounting Fixture For With Kistler 6058A On Model K9913C From TMS.
9913-MNT015	Calibration Mounting Fixture For With Kistler 6125B On Model K9913C From TMS.
9913-MNT016	Calibration Mounting Fixture For With Kistler 6613 On Model K9913C From TMS
9913-MNT017	Calibration Mounting Fixture For With PCB Model 102A and 102B On 9913 series Calibrators From TMS.
9913-MNT018	Calibration Mounting Fixture For With Kistler 601A with 6421 adapter M7x0.75 On 9913 series Calibrators from TMS
9913-MNT019	Calibration Mounting Fixture For With Kistler 7005 with 7421 adapter M12x1 On 9913 series Calibrators from TMS
9913-MNT02	Calibration Mounting Fixture For With PCB 137 series sensors on Model K9913C From TMS.
9913-MNT020	Calibration Mounting Fixture For With PCB 116B On 9913 series Calibrators From TMS
9913-MNT021	Calibration Mounting Fixture For With Sensors With 1/4-18 NPT On 9913 series Calibrators From TMS
9913-MNT022	Calibration Mounting Fixture On 9913 series Calibrators From TMS For Kistler 6162A
9917C	Acoustic comparison calibration fixture. 31.5 Hz to 10 kHz. Supports 1/4" and 1/2" microphone calibration, compliant to IEC 61094-5
9917C	Acoustic comparison calibration fixture. 31.5 Hz to 10 kHz. Supports 1/4" and 1/2" microphone calibration, compliant to IEC 61094-5. Does not include reference microphone.
9961C	Gravimetric Calibration Drop Fixture, for calibrating accelerometers, force sensors, and impact hammers.
9962C	Calibrated Masses for use with 9961 Gravimetric Calibration Fixture.
C9110D	Portable Vibration Calibrator: ICP, charge, voltage inputs - frequency range 5 Hz to 10 kHz - amplitude to 20 g, 20 ips, 150 mils – English & metric scales – certificate generation in mV, pC, µA, mA – A2LA accredited +/- 3% accuracy (10 Hz to 10 kHz)
ILC	Participation in Interlaboratory Comparison for vibration from frequencies supported between 5 Hz to 20 kHz. Sensor and Data Collection Worksheet with instructions sent. Upon return, ILC Report provided detailing double blind comparison with other independent labs.
ILC-LF	Participation in Interlaboratory Comparison for vibration from frequencies supported between 5 Hz to 20 kHz. Sensor and Data Collection Worksheet with instructions sent. Upon return, ILC Report provided detailing double blind comparison with other indepen
IV485B39	2-channel, USB-powered, sensor signal conditioner with USB digital output (24-bit A/D). ICP input on channel 1, voltage input on channel 2.
K080A199/442/830	Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with secondary method from 5 to 15,000 Hz, 10-32 UNF SUT mounting thread. Includes 442A102 ICP signal conditioner.
K080A199/442/831	Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C11. 10 mV/g, calibrated with secondary method from 5 to 20,000 Hz, 10-32 UNF SUT mounting thread. Includes 442A102 ICP signal conditioner.
K080A199/482/830	Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with secondary method from 5 to 15,000 Hz, 10-32 UNF SUT mounting thread. Includes 482A21 ICP signal conditioner.
K080A199/482/831	Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C11. 10 mV/g, calibrated with secondary method from 5 to 20,000 Hz, 10-32 UNF SUT mounting thread. Includes 482A21 ICP signal conditioner.
K080A199C/442/830	Beryllium Free Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with secondary method from 5 to 15,000 Hz, 10-32 UNF SUT mounting thread. Includes 442A102 ICP signal conditioner.
K080A199C/482/830	Beryllium Free Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with secondary method from 5 to 15,000 Hz, 10-32 UNF SUT mounting thread. Includes 482 Series ICP signal conditioner.
K080A200/442/830	Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with secondary method from 5 to 15,000 Hz, ¼-28 SUT mounting thread. Includes 442A102 ICP signal conditioner.
K080A200/442/830C	Beryllium Free Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with laser primary method from 5 to 15,000 Hz, ¼-28 SUT mounting thread. Includes 442A102 ICP signal conditioner.
K080A200/442/831	Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C11. 10 mV/g, calibrated with secondary method from 5 to 20,000 Hz, ¼-28 SUT mounting thread. Includes 442A102 ICP signal conditioner.
K080A200/482/830	Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with secondary method from 5 to 15,000 Hz, ¼-28 SUT mounting thread. Includes 482A21 ICP signal conditioner.
K080A200/482/830C	Beryllium Free Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with laser primary method from 5 to 15,000 Hz, ¼-28 SUT mounting thread. Includes 482A21 ICP signal conditioner.
K080A200/482/831	Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C11. 10 mV/g, calibrated with secondary method from 5 to 20,000 Hz, ¼-28 SUT mounting thread. Includes 482A21 ICP signal conditioner.
K2002E002	Inertial Shaker Kit, 9 N (2 lbf) pk sine force, includes 2002E inertial shaker with 2100E21-100 power amplifier, and mounting accessories.
K2002E01	Inertial Shaker Kit, 9 N (2 lbf) pk sine force, includes 2002E inertial shaker with 2000E power amplifier, and mounting accessories.
K2004E004	Miniature Shaker Kit, 20 N (4.5 lbf) pk sine force, 5 mm (0.2") pk-pk stroke, includes 2004E miniature shaker with 2100E21-100 power amplifier, trunnion mounting base and 2110G06 stinger kit.
K2004E01	Miniature shaker with integrated amplifier with BNC input, 20 N (4.5 lbf) pk sine force, 5 mm (0.2") pk-pk stroke. Includes trunnion base, 2110G06 stinger kit, and heavy duty case.
K2007E007	Miniature Shaker Kit, 31 N (7 lbf) pk sine force, 13 mm (0.5") pk-pk stroke, includes 2007E miniature shaker with 2100E21-100 power amplifier, trunnion mounting base and 2110G06 stinger kit.
K2007E01	Miniature shaker with integrated amplifier with BNC input, 31 N (7 lbf) pk sine force, 13 mm (0.5") pk-pk stroke. Includes trunnion base, 2110G06 stinger kit, and heavy duty case.
K2025E013	Modal Shaker Kit, 58 N (13 lbf) pk sine force, 18 mm (0.7") pk-pk stroke, includes 2025E modal shaker with 2100E21-400 power amplifier, and 2000X03 accessory kit.
K2060E030	Modal Shaker Kit, 133 N (30 lbf) pk sine force, 36 mm (1.4") pk-pk stroke, includes 2060E modal shaker with 2100E21-400 power amplifier, and 2000X03 accessory kit.
K2060E060	Modal Shaker Kit, 267 N (60 lbf) pk sine force, 36 mm (1.4") pk-pk stroke, includes 2060E modal shaker with 2050E09 power amplifier, 2000X04 cooling package, and 2000X03 accessory kit.
K2075E040	Electrodynamic Exciter Kit, 178 N (40 lbf) pk sine force, 25.4 mm (1") pk-pk stroke, includes 2075E dual purpose platform shaker with 2100E21-400 power amplifier, and 2000X03 accessory kit.
K2075E040-HT	Electrodynamic Exciter Kit with Horizontal Table. 178 N (40 lbf) pk sine force system. Includes 2075E shaker with 2100E21-400 power amplifier, lightweight horizontal magnesium flexure table, shaker mounting base for vertical and horizontal.
K2075E075	Electrodynamic Exciter Kit, 334 N (75 lbf) pk sine force, 25.4 mm (1") pk-pk stroke, includes 2075E dual purpose platform shaker with 2050E09 power amplifier, 2000X04 cooling package, and 2000X03 accessory kit.
K2075E-HT	Electrodynamic Exciter Kit with Horizontal Table. 334 N (75 lbf) pk sine force. Includes 2075E shaker, lightweight horizontal magnesium flexure table, mounting base for vertical and horizontal operation, power amplifier, and 2000X04 cooling package.
K2100E035	Modal Shaker Kit, 156 N (35 lbf) pk sine force, 25.4 mm (1") pk-pk stroke, includes 2100E11 modal shaker with 2100E21-400 power amplifier, and 2100E11-001 accessory kit.
K2100E100	Modal Shaker Kit, 440 N (100 lbf) pk sine force, 25.4 mm (1") pk-pk stroke, includes 2100E11 modal shaker with 2100E18 power amplifier, cooling package, and 2100E11-001 accessory kit.
K2100E11	Modal Shaker Kit, 156 N (35 lbf) pk sine force, 25.4 mm (1") pk-pk stroke, includes 2100E11 modal shaker with 2050E05 power amplifier, and 2100E11-001 accessory kit.
K2110E110	Electrodynamic Exciter Kit, 489 N (110 lbf) pk sine force, 25.4 mm (1") pk-pk stroke, includes 2110E dual purpose platform shaker with 2050E09-FS power amplifier, 2000X04 cooling package, and 2000X03 accessory kit.
K2110E-HT	Electrodynamic Exciter Kit with Horizontal Table. 489 N (110 lbf) pk sine force. Includes 2110E shaker, lightweight horizontal magnesium flexure table, mounting base for vertical and horizontal operation, power amplifier and 2000X04 cooling package.
K2160G	Piano Wire Stinger Kit for Modal Exciters, includes quick disconnect load cell adapter, 50 ft (15.24 m) spool of wire, and crimp sleeves.
K394B30	Calibration Exciter System, includes 15 kHz air bearing shaker, internally mounted reference accelerometer with signal conditioner, power amplifier, DC current amplifier and air regulator. Requires 50psi compressed air supply.
K394B30C	Non-Beryllium Calibration Exciter System, includes 15 kHz air bearing shaker, internally mounted reference accelerometer with signal conditioner, power amplifier, DC current amplifier and air regulator. Requires 50psi compressed air supply.
K394B31	Calibration Exciter System, includes 20 kHz air bearing shaker, internally mounted reference accelerometer with signal conditioner, power amplifier, DC current amplifier and air regulator. Requires 50psi compressed air supply.
K7090A	General Purpose Adhesive Kit.
K9000-917-1/2	Acoustic comparison calibration kit. Includes 9000A, 9917C, cables, and 1/2" ICP reference microphone.
K9000-917-1/2	Acoustic comparison calibration kit. Includes 9000A, 9917C, cables, and 1/2" ICP reference microphone. System Factory Acceptance Test may be ordered separately as K9000-C917.
K9000-917-1/4	Acoustic comparison calibration kit. Includes 9000A, 9917C, cables, and 1/4" ICP reference microphone.
K9000-917-1/4	Acoustic comparison calibration kit. Includes 9000A, 9917C, cables, and 1/4" ICP reference microphone. System Factory Acceptance Test may be ordered separately as K9000-C917.
K9000-C917	Calibration service on Model K9000-917 series. Includes acceptance test of K9000-917 as a system. Requires customer to return K9000-917 components. Does not include recalibration of each component.
K9000-C917	Calibration service on Model K9000-917 series. Includes acceptance test of K9000-917 as a system. Requires customer to return K9000-917 components. Does not include recalibration of each component.
K9145D10	Semi-portable Accelerometer Calibration System. Allows for NIST/PTB traceable calibration of accelerometers from 7 Hz to 10 kHz. Includes Model 9110D portable calibrator, laptop controller, data acquisition system and accessories.
K9155D01	Kit for 9155 Accelerometer Calibration Systems. Includes 9155D, 9155D-442 and 9155D-830. Desktop system with ICP signal conditioning, in-line charge amplifier and precision air-bearing shaker.
K9155D02	Kit for Modal 9155 Calibration Systems. Includes 9155D, 9155D-100, 9155D-400, 9155D-443 and 9155D-830. Rack Mount system with precision air-bearing shaker, PC controlled dual-mode amplifier and TEDS support.
K9155D03	Kit for 9155 Accelerometer Calibration System. Includes -100, -350, 400, 443, -501, -550, -600 and -830. Rackmount system with air bearing shaker, dual-mode amplifier, label printing, TEDS sesnor support. Includes Linearity and Resonance test modes.
K9155D-1032-MACC	10-32 Mounting Accessories for 9155 Calibration Workstation
K9155D-1428MACC	1/4-28 Mounting Accessories for 9155 Calibration Workstation
K9525C	Stand-alone, turnkey shock calibration system, using 9525C PneuShockTM actuator, system includes PC controller, data acquisition card, measurement software with data base, PCB reference accelerometer, cables and mounting accessories.
K9901C	Turnkey instrumented shock tube system, includes PC based data acquisition, database, signal conditioning, and accessories. Capable of measuring rise time and resonant frequency of pressure sensors with appropriate mounting adaptors.
K9903C	Standalone, turnkey dynamic pressure calibration system. Integrates PCB 903B02 low pressure pulse calibrator to generate a known step function input for comparison calibration up to 150 psi.
K9903C01	Standalone, turnkey dynamic pressure calibration system. Integrates PCB 903B02 low pressure pulse calibrator to generate a known step function input for comparison calibration up to 150 psi. 903B02 hardware NOT included.
K9905D	Turnkey high pressure calibration system, includes actuator, PC based data acquisition, database, signal conditioning, and accessories. Capable of step pressure loads of 80,000 psi (515 MPa).
K9905D+AUTO	Turnkey high pressure cal sys, incl. servo driven actuator, HMI PC based data acquisition, database, signal conditioning & accessories. Capable of step pressure loads of 80,000 psi (515 MPa)
K9905D01	Data acquisition and automation package, upgrades TMS Model 9905D to a turnkey Model K9905D.
K9907C	Turnkey dynamic pressure calibration system, includes PC based data acquisition, database, signal conditioning, and accessories. Capable of step pressures pulses of 1,000 psi (6.89 MPa) with 30 microsecond rise time.
K9907C01	Data acquisition and automation package, upgrades PCB Model 907A02 or 907A07 to a turnkey Model K9907C.
K9913C	Standalone, turnkey dynamic pressure calibration system. Integrates PCB 913B02 hydraulic impulse calibrator utilizing a mass drop onto piston in a fluid filled cylinder for comparison of dynamic pressure sensors.
K9913C01	Data acquisition and automation package, upgrades PCB Model 913B02 to a turnkey Model K9913C
KP080A199/442/830	Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with laser primary method from 5 to 15,000 Hz, 10-32 UNF SUT mounting thread. Includes 442A102 ICP signal conditioner.
KP080A199/442/831	Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C11. 10 mV/g, calibrated with laser primary method from 5 to 20,000 Hz, 10-32 UNF SUT mounting thread. Includes 442A102 ICP signal conditioner.
KP080A199/482/830	Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for 396C10. Calibrated with laser primary method from 5 to 15 kHz. Includes 482 type ICP signal conditioner.
KP080A199/482/831	Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C11. 10 mV/g, calibrated with laser primary method from 5 to 20,000 Hz, 10-32 UNF SUT mounting thread. Includes 482A21 ICP signal conditioner.
KP080A199C/442/830	Beryllium Free Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with laser primary method from 5 to 15,000 Hz, 10-32 UNF SUT mounting thread. Includes 442A102 ICP signal conditioner.
KP080A199C/482/830	Beryllium Free Armature insert kit. Includes signal conditioner, 10-32 UNF mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with laser primary method from 5 to 15,000 Hz, 10-32 UNF SUT mounting thread. Includes 482 Series ICP signal conditioner.
KP080A200/442/830	Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with laser primary method from 5 to 15,000 Hz, ¼-28 SUT mounting thread. Includes 442A102 ICP signal conditioner.
KP080A200/442/831	Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C11. 10 mV/g, calibrated with laser primary method from 5 to 20,000 Hz, ¼-28 SUT mounting thread. Includes 442A102 ICP signal conditioner.
KP080A200/482/830	Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with laser primary method from 5 to 15,000 Hz, ¼-28 SUT mounting thread. Includes 482A21 ICP signal conditioner.
KP080A200/482/831	Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C11. 10 mV/g, calibrated with laser primary method from 5 to 20,000 Hz, ¼-28 SUT mounting thread. Includes 482A21 ICP signal conditioner.
KP080A200C/442/830	Beryllium Free Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with laser primary method from 5 to 15,000 Hz, ¼-28 SUT mounting thread. Includes 442A102 ICP signal conditioner.
KP080A200C/482/830	Beryllium Free Armature insert kit. Includes signal conditioner, ¼-28 mounting accessory kit and armature insert w/ internal reference accelerometer for air bearing shaker 396C10. 10 mV/g, calibrated with laser primary method from 5 to 15,000 Hz, ¼-28 SUT mounting thread. Includes 482 Series ICP signal conditioner.
LaserTach	ICP® Laser Tachometer, BNC output, to 30,000 rpm, 20 inch operating range, includes mounting bracket.
LaserTach Kit	ICP® LaserTach Kit, includes LaserTach with BNC output, 10 ft (3 m) BNC to BNC cable, 1140C03 mini-tripod and retro-reflective tape.
LT2	ICP® Laser Tachometer, BNC output, continuous laser operation, up to 100,000 RPM, 20 in (0.5 m) operating range, includes mounting bracket and retro-reflective tape.
LT2 Kit	ICP® Laser Tachometer Kit, BNC output, continuous laser operation, up to 100000 RPM, 20 in (0.5 m) operating range, includes 10 ft (3 m) BNC to BNC cable, 1140C03 mini-tripod and retro-reflective tape.
LT-Tape	Retro-reflective tape for use with LaserTach™, 1 inch x 1 meter.