PCB Piezotronics / IMI Sensors 국내총판대리점

PCB Piezotronics / IMI Sensors 국내총판대리점 - 케이티엠엔지니어링

PCB, IMI 진동 가속도 센서 한국대리점 (KTM) 2025. 4. 24. 14:43

PCB Piezotronics / IMI Sensors 국내총판대리점 - 케이티엠엔지니어링

PCB Piezotronics / IMI Sensors Domestic Distributor - KTM Engineering

PCB Piezotronics / IMI Sensors Exclusive distributor in Korea - KTM Engineering

산업용 센서 / 진동센서 / 진동엔지니어링 / PCB진동센서 / PCB가속도센서 / PCB사진진동센서 / PCB사가속도센서 / IMI진동센서 / IMI가속도센서 /

TMS진동캘리브레이터 / TMS Proximity Transducer Calibrator / TMS Portable Vibration Calibrator

-> 케이티엠엔지니어링이 정식 한국대리점입니다.

PCB Piezotronics의 사업부인 IMI Sensors, THE MODAL SHOP 은 가속도계, 진동 트랜스미터 및 진동캘리브레이터 같은 산업용 진동 모니터링 기기의 글로벌 설계 및 제조업체입니다.

국내독점 정식대리점에서 고객 맞춤 서비스를 제공하여 드립니다.

진동, 변위, 하중, 응력 (유, 무선) 측정 전문업체

(주)케이티엠엔지니어링

전화: 031-628-6078

메일: dyk@ktme.com ｜홈페이지: http://www.ktmeng.com

주소: 경기도 성남시 분당구 대왕판교로 670 유스페이스2 B동 808호

M261B11	Triax force link, 1000 lb (Fz), 500 lb (Fx,y), 15 pC/lb (z), 32 pC/lb (x,y), charge output, ground isolated
M320C15	ESS mini (2 gm), quartz shear ICP® accel, 10 mV/g, 2 to 10k Hz, 5-44 side conn., M3 x 0.50 mtg stud (to +325░F)
M320C18	ESS mini (2 gm), quartz shear ICP® accel, 10 mV/g, 2 to 10k Hz, 10-32 top conn., M3x0.50 mtg stud (to +325░F)
M320C20	ESS (6.5 gm) quartz shear ICP® accel, 10 mV/g, 2 Hz to 10 kHz, 10-32 top conn.
M320C52	UHT-12 TM, ICP® accelerometer, miniature (2 gm), ring-style, very low temp. coefficient, 10 mV/g, 1 to 10k Hz, 5-44 side conn., Metric mount
M320C53	UHT-12™, ICP® accel., Miniature (2 gm), Ring-style, low temperature coefficient LTC , 1 mV/g, 1 to 10k Hz, 5-44 side connector
M338C04	Low profile, high sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 to 7k Hz, 10-32 side conn., M6 x 0.75 mtg stud
M3501B1220KG	MEMS shock accelerometer, 20 kg, M6 x 0.75 stud mount, 096 integral cable (side exit), length 10-ft pigtails
M3501B122KG	MEMS shock accelerometer, 2 kg, M6 x 0.75 stud mount, 096 integral cable (side exit), length 10-ft pigtails
M3501B1260KG	MEMS shock accelerometer, 60 kg, M6 x 0.75 stud mount, 096 integral cable (side exit), length 10-ft pigtails
M350A13	Shock, quartz-shear, ICP® accel., 0.5 mV/g, 10k g range, LP filter, 10-32 top conn., M6 x 0.75 mtg stud
M350A14	Shock, quartz-shear, ICP® accel., 1 mV/g, 5k g range, LP filter, 10-32 top conn., M6 x 0.75 mtg stud
M350B01	ICP® Accel., Shock, 0.05 mV/g, 100,000 g, 4 to 10 kHz, integral cable, M6 x 0.75 stud, Filtered
M350C03	Shock, ceramic-shear, ICP® accel., 0.5 mV/g, 10k g range, LP filter, 10-32 top conn., M6 x 0.75 mtg stud
M350C04	Shock, ceramic-shear, ICP® accel., 1 mV/g, 5k g range, filtered, 10-32 top conn., M6 x 0.75 mtg stud
M350C23	Shock, ceramic-shear, ICP® accel., 0.5 mV/g, 10k g range, filtered, 10-ft integral cable
M350C24	Shock, ceramic shear, ICP® accel, 1.0 mV/g, 5k g range, 10-ft integral cable to 10-32 plug, M6 x 0.75 mtg stud, case isolated
M350D02	Shock, ICP® accel, 0.1 mV/g, 50K g, 10-ft integral cable, M6 x 0.75 integral stud
M351B11	Cryogenic, miniature quartz shear ICP® accel., 5 mV/g, 1 to 10k Hz, 5-44 side conn., M3 mtg stud, operating temp -320 to +250░F (-196 to +121░C)
M351B14	Cryogenic, miniature quartz shear ICP® accel., 5 mV/g, 1 to 10k Hz, 10-32 top conn., M3 mtg stud, operating temp -320 to +250 F (-196 to +121 C)
M352A60	High frequency, ceramic shear ICP® accel., 10 mV/g, 5 to 60k Hz, 5-44 top conn., M6 x 0.75 integral stud
M352C15	Miniature (2 gm), high frequency, ceramic shear ICP® accel., 10 mV/g, 1 to 12k Hz, 5-44 side conn., M3 mtg stud
M352C17	Miniature (2 gm), high frequency, ceramic shear ICP® accel., 10 mV/g, 1 to 12k Hz, 10-ft attached cable
M352C18	Miniature (2 gm), high frequency, ceramic shear ICP® accel., 10 mV/g, 1 to 12k Hz, 10-32 top conn.
M352C65	Platinum Stock Products; High sensitivity, miniature (2 gm), ceramic shear ICP® accel., 100 mV/g, 0.5 to 10k Hz, 5-44 side conn.
M352C66	High sensitivity, miniature (2 gm), ceramic shear ICP® accel., 100 mV/g, 0.5 to 10k Hz, 5-44 top conn.
M352C67	High sensitivity, miniature (2 gm), ceramic shear ICP® accel., 100 mV/g, 0.5 to 10k Hz, 10-ft attached cable
M352C68	High sensitivity, miniature (2 gm), ceramic shear ICP® accel., 100 mV/g, 0.5 to 10k Hz, 10-32 top conn.
M353B11	High frequency, quartz shear ICP® accel., 5 mV/g, 1 to 10k Hz, 5-44 side conn., M3 x 0.50 integral stud
M353B12	High frequency, quartz shear ICP® accel., 5 mV/g, 1 to 10k Hz, 5-44 top conn., M3 mtg stud
M353B13	High frequency, quartz shear ICP® accel., 5 mV/g, 1 to 10k Hz, 2-pin top conn., 10 ft. attached twisted pair cable to 10-32 plug, M3 mtg stud
M353B14	High frequency, quartz shear ICP® accel., 5 mV/g, 1 to 10k Hz, 10-32 top conn., M3 mtg stud
M353B15	Platinum Stock Products; High frequency, quartz shear ICP® accel., 10 mV/g, 1 to 10k Hz, 5-44 side conn., M3 x 0.50 integral stud
M353B16	High frequency, quartz shear ICP® accel., 10 mV/g, 1 to 10k Hz, 5-44 top conn., M3 x 0.50 integral stud
M353B17	Platinum Stock Products; High frequency, quartz shear ICP® accel., 10 mV/g, 1 to 10k Hz, 10-ft integral cable, M3 x 0.50 integral stud
M353B18	Platinum Stock Products; High frequency, quartz shear ICP® accel., 10 mV/g, 1 to 10k Hz, 10-32 top conn., M3 x 0.50 integral stud
M353B77	ICP® Accel., 2 mV/g, 2500 g, 1 to 10 kHz, 1.7 gm, 10 ft. integral cable, M3 integral stud, filtered
M354A04	Triaxial, Thru-hole mtg, Ceramic shear ICP® accel, 10 mV/g, 0.4 to 5k Hz, Case isolated, TEDS V1.0, 4-pin connector
M354A05	Triaxial, Thru-hole mtg, Ceramic shear ICP® accel, 100 mV/g, 0.4 to 5k Hz, Case isolated, TEDS V1.0, 4-pin connector
M354C02	Triaxial, thru-hole mtg, ceramic shear ICP® accel., 10 mV/g, 0.5 to 2k Hz, ground isolated, 4-pin conn.
M354C03	Triaxial, thru-hole mtg, ceramic shear ICP® accel., 100 mV/g, 0.5 to 2k Hz, ground isolated, 4-pin conn., supplied with insulated M5 x 0.80 cap screw
M354C10	Triaxial, thru-hole mtg, ceramic shear ICP® accel., 10 mV/g, 2 to 8k Hz, gnd iso, 5-ft integral cable, 5-ft extension cable to (3) BNC plugs, insulated M3 cap screw
M354C10/NC	Triaxial, thru-hole mtg, ceramic shear, miniature ICP® accel., 10 mV/g, 2 to 8k Hz, ground isolated, 5 ft. integral cable, no extension cable.
M355B02	Ring-style, general purpose, ceramic shear ICP® accel., 10 mV/g, 1 to 10k Hz, 10-32 side conn., through hole mtg with M3x0.5x16mm insulated cap screw, ground isolated
M355B03	Ring-style, high sensitivity, ceramic shear ICP® accel., 100 mV/g, 1 to 10k Hz, 10-32 side conn., through hole mtg with M3x0.5x16mm insulated cap screw, ground isolated
M355B04	Ring-style, high sensitivity, ceramic shear ICP® accel., 1000 mV/g, 1 to 10k Hz, 10-32 side conn., through hole mtg with M3x0.5x16mm insulated cap screw, ground isolated
M355B12	Miniature (2 gm), ring-style, ceramic shear ICP® accel., 10 mV/g, 1 to 10k Hz, 5-44 side conn., through hole mtg with M2x0.4 insulated cap screw, ground isolated
M355B33	ICP® Accel., 100 mV/g, 50 g, 2 to 5 kHz, 10-32 Side Conn., Through Hole Mount, M3 Bolt
M355B35	Ring-style, high sensitivity, ceramic shear ICP® accel., 500 mV/g, 1 to 10k Hz, 10-32 side conn.
M356A70	Triaxial, miniature (8 gm), charge output accel., 2.7 pC/g, 5k Hz, (3) 5-44 conn., supplied with M5 X 0.80 cap screw
M356A71	Triaxial, miniature (23 gm) charge output accel., 10 pC/g, 5k Hz, (3) 10-32 conn., supplied with (2) M3 X 0.50 cap screws
M357A05	Ring-style, charge accel., 17 pC/g, +/- 500 g pk, 10 kHz, high temp 350 F, 10-32 side conn., through hole mount with M3x 0.5 thd x 5/8" long insulated cap screw, gnd iso
M357B06	Miniature (2 gm), ring-style, charge output accel., 5 pC/g, 10k Hz, 5-44 side connector, with M2 x 0.4 mount
M357B11	High temp., miniature (2 gm), ceramic shear, charge output accel., 3 pC/g, 12k Hz, 5-44 side conn.(-95F to +500F), M3 x 0.50 integral stud
M357B14	High temp., miniature (2 gm), ceramic shear, charge output accel., 3 pC/g, 12k Hz, 10-32 top conn., operating temp -95 to +500F, M3 mtg stud
ND	Tajimi 7-pin plug
NE	NIM-CAMAC coaxial plug (LEMO FFA.00.250.NTAC22Z plug, GMA.00.018.DN black bend relief)
NF	Triple splice assembly with (3) 1-ft coaxial cables each with a BNC plug (AC connector), 4-cond. shield grounded
NG	6-pin Fischer connector wired for SKF triax
NH	Harting Connector
NJ	10-32 jack, double isolated, Inconel (for Series 357E9x)
NL	Lemo connector with ID chip
QF	3-socket molded composite connector (MIL-C-5015 compatible) for TO accelerometers
NM	4-socket MIL connector W/strain relief
NN	Triple splice assembly with (3) 1-ft 4-cond. cables each with a mini 8-pin DIN (LT connector for 3713 Series)
NP	Pigtail (no connector, stripped and tinned ends only) labeled for 3503 Series
NQ	Tajimi 5-pin plug
NT	Integral cable 10-32 plug (EB type), low outgassing with hand held pre-printed heat shrink label for sensor model and s/n
NU	Pigtails labeled for differential triaxial MEMS sensors (3743 Series)
NV	Triple splice assembly with (3) 1-ft coaxial cables each with a 10-32 plug (EB connector), integral cables only, special labeling, low outgassing
NW	Low outgassing BNC plug
NX	4-socket plug
NY	6-socket plug
NZ	5-pin ODU plug
P340A75	High-temp., miniature (2 gm), ceramic shear charge accel., 3 pC/g, pos. polarity, 12k Hz, M3 side conn., M3 stud mount
P356A70	Triaxial, miniature (8 gm), charge output accel., 2.7 pC/g, 5k Hz, (3) 5-44 conn., positive polarity
P356A71	Triaxial, miniature (23 gm) charge output accel., 10 pC/g, 5k Hz, (3) 10-32 conn., positive polarity
P357A05	Charge Output Accel., High Temp., 17 pC/g, 500 g, 10kHz, 10-32 side conn., through hole mount. positive polarity
P357A07	Low outgassing miniature accel, charge output, +polarity, high temp 1.7 pC/g, 15kHz, hermetic, titanium, M3 conn, to 500 F, with 10 ft detachable cable
P357A08	Miniature (0.14 gm), teardrop-style, charge output accel., 0.3 pC/g , 10k Hz, 3-56 conn. positive polarity
P357A09	Miniature (0.6 gm) charge output accel., 1.7 pC/g, 10k Hz, titanium housing, 10-ft detachable cable, positive polarity
P357A09/NC	Miniature (0.6 gm) charge output accel., 1.7 pC/g, 10k Hz, titanium housing
P357A19	Positive Polarity Miniature, teardrop-style, Charge output accelerometer, 0.3 pC/g 3-56 connector, titanium housing
P357B03	High temp., ceramic shear, charge output accel., 10 pC/g, 9k Hz, 10-32 side conn.(-95 to +500 F), positive polarity
P357B04	High temp., ceramic shear, charge output accel., 10 pC/g, 9k Hz, 10-32 top conn.(-95 to +500 F) positive polarity
P357B06	Miniature (2 gm), ring-style, charge output accel., 5 pC/g, 10k Hz, 5-44 side conn. positive polarity
P357B21	High temp., ceramic shear, charge output accel., 30 pC/g, 6k Hz, 10-32 side conn.(-95 to +500 F), positive polarity
P357C10	Miniature Charge Output Accel, 1.7 pC/g, 500 g, to 10 kHz, 0.45 gm, 3-56 conn. positive polarity
P357C10/NC	Miniature Charge Output Accel, 1.7 pC/g, 500 g, to 10 kHz, 0.45 gm, 3-56 conn. positive polarity
PC	Triple splice assembly with (3) 1-ft coaxial cables each with a NIM-CAMAC coaxial plug (NE connector)
PCS-0	Recal of non-PCB Pressure Sensor to Manufacturer's Specifications
PCS-1	Calibration of dynamic pressure sensors at 20% intervals to full scale, max 15 kpsi range. (except series 113B50)
PCS-10	Single point sensitivity coefficient at sensor maximum operating temperature
PCS-10AE	Single point sensitivity coefficient at customer specified point, within operating temperature range.
PCS-11	Calibration of 402 in-line voltage amplifier
PCS-12	Calibration of 122 & 124 Series
PCS-13	Calibration of123 Series
PCS-15	Hydrotest at 3000 psi for 1 hour
PCS-15AB	Hydrotest of pressure sensor at 750 psi for 1 hour
PCS-15AC	Hydro test of pressure sensor at 300 psi for 1 hour
PCS-16	Leaktest of mounted pressure sensor and/or adaptor at maximum total pressure
PCS-17	Frequency response of 106B series from 20 Hz to 50 kHz
PCS-17AA	Frequency response of 106B series from 10 Hz to 100 Hz, tabulated and plotted
PCS-17AB	Frequency response of 106B series from 5 Hz to 100 Hz (300 mV sensitivity min required) Frequency plot and tabular format
PCS-1AA	Calibration of pressure sensor from 0.5 psi to 2 psi, in steps of 0.5 psi
PCS-1AC	Calibration of pressure sensors, 10% partial range, sensors up to 20k psi
PCS-1AD	Calibration of pressure sensors at 10 psi, 5 points at 20% intervals.
PCS-1AF	Calibration of pressure sensors up to 2x standard range in 20% intervals (for sensors that state usefull overange of 5 V or 10 V)
PCS-1AK	Calibration of pressure sensor to 3000 psi at 20% intervals, with additional points at 2000 and 2500 psi
PCS-1AM	Calibration of piezoeletric pressure sensors from 0 to 15,000 psi at 20% increments.
PCS-1AN	Cal points on 112A2x series at 0.5 psi, 1.0 psi, 1.5 psi, 2.0 psi, 2.5 psi, 5 psi, 0.5 psi. No full scale calibration.
PCS-1AP	Calibration of dynamic pressure sensor to 3500 psi in steps of 500 psi. At room temperature and 200C
PCS-1AQ	Calibration of dynamic pressure sensors at 30, 60, 90, 120, and 150 psi.
PCS-1AR	Calibration of dynamic pressure sensor; 15k, 5k, 1k psi at 20% intervals to full scale
PCS-1AT	Calibration of dynamic pressure sensors at 10% intervals over Customer Supplied range, max 15 kpsi range
PCS-2	Calibration of pressure sensors up to 100k psi (includes Series 117B in oil, excludes model 113B50)
PCS-21	Special calibration and testing including hydrotest, sensitvity coefficent at 500F, dynamic calibration with points 20, 40, 60, 80, 100, 200, 1750, 2150, and 2250
PCS-2AA	Calibration of pressure sensor to 15k psi (includes Series 117B in oil, excludes model 113B50), Omit standard calibration range
PCS-2AB	Calibration of pressure sensor, 14-pt to 16,800 psi
PCS-2AE	Calibration of pressure sensors to 30 kpsi at 5 kpsi steps
PCS-2AG	Calibration of series 119 pressure sensors, 1K psi and 5K psi cal ranges at 20% intervals
PCS-2AH	Calibration of pressure sensors, includes standard PCS-2 and 20K psi cal range at 20% intervals
PCS-2AJ	Calibration of pressure sensors up to 100 psi at 20% intervals (includes Series 117B in oil, excludes model 113B50)
PCS-2AK	Calibration of pressure sensor up to 80k psi (includes Series 117B in oil)
PCS-3	Calibration of high-temp. Models 112A04 & 112A05, Series 112B & Series 116B, and cryogenic 102A Series, 176 series
PCS-4	Cal of 117 w/cust brass in 090 adaptor MUST get (8) ea unfired unprimed brass on RMA. Specify caliber, according to SAAMI guidelines (dwg 44444 App A) or cust specified range
PCS-4AC	Cal of 117 with brass in 090 adaptor, 80 kpsi, 10 kpsi intervals
PCS-5	Calibration of Series 113B50, 122A, 123A, & 124A
PCS-6	Calibration of Series 134, 137 (2-sensor probes only) & 138
PCS-6A	Calibration of Series 134, 137 & 138 in pressure units of bar
PCS-6B	Calibration, 250 psi FS for model series 134,137,138
PCS-7	Calibration of Model 136A
PCS-7AA	Calibration of Model 136A or 108A04 in 913B02
PCS-8	System calibration, charge output pressure sensor/cable/in-line source follower to max range of sensor (for repairs…add sensor and amp cal code & price)
PCS-8AA	System calibration for charge output pressure sensor/cable/in-line source follower to 15,000 psi (req separate sensor and amp recals)
PCS-8AB	System calibration for charge output pressure sensor/cable/in-line source follower to 300 psi (req separate sensor and amp recals)
PCS-8AC	System calibration for charge output pressure sensor/cable/in-line source follower to 55,000 psi (req separate sensor and amp recals)
PCS-8AD	System calibration for charge output pressure sensor/cable/in-line source follower to 1000 psi. (req separate sensor and amp recals)
PCS-8AF	System calibration, to 10k psi (req separate sensor and amp recals)
PCS-8AG	System calibration for charge output pressure sensor/cable/in-line source follower to 1500 psi. (req separate sensor and amp recals)
PCS-8AH	System calibration for charge output pressure sensor/cable/in-line source follower to 100 psi (req separate sensor and amp recals)
PCS-8AI	System calibration for charge output pressure sensor/cable/in-line source follower to 20k psi (req separate sensor and amp recals)
PCS-8AJ	System calibration for charge output pressure sensor/cable/in-line source follower to 100 psi, with extra cal point at 10 psi (req separate sensor and amp recals)
PCS-8AK	System calibration for charge output pressure sensor/cable/in-line source follower to 30 kpsi (req separate sensor and amp recals)
PCS-8AL	System calibration for charge output pressure sensor/cable/in-line source follower to 5,000 psi (req separate sensor and amp recals)
PCS-8AM	System calibration for charge output pressure sensor/cable/in-line source follower to 50 psi (req separate sensor and amp recals)
PCS-8AN	System calibration for chanrge mode pressure sensor/cable/in-line source folllower to 2,000 psi
PCS-8AP	System calibration SPECIAL, ICP® pressure sensor/signal conditioner (requires separate sensor and signal conditioner recalibrations)
PCS-9	Shock tube frequency response
PCS-9AA	Shock tube frequency response on 132B38, reflected, mounted in neoprene rubber
PCS-9AC	Shock tube frequency response, 1 kHz to 100 kHz
PCS-QC	Special QC Documentation (for pressure sensors)
PD	(3) 3-pin IDC connectors and strain relief (for use in Series 009M202)
PE	(3) BNC plugs (for use in Series 009M202)
PG	Splice assembly to (3) BNC plugs and (2) pigtails wired/labeled for 3713 Series
PH	Low outgassing 10-32 coaxial jack
PJ	BNC jack for shielded pair cabling, shield open
PK	Integral cable 10-32 plug (EB type), low outgassing with hand held pre-printed heat shrink label for sensor s/n
PR	9-pin D-Sub female
PRS-1	PRESSURE SENSOR REPAIR SERVICE
PRS-2	PRESSURE SENSOR REPAIR SERVICE
PRS-3	PRESSURE SENSOR REPAIR SERVICE
PTC-1	Pressure transducer recalibration, A grade, 0.5% accuracy
PTC-1AA	Pressure transducer recalibration, A grade, 0.5% accuracy, 400 psig
PTC-2	Pressure transducer recalibration, B & C grades, 0.25% and 0.1% accuracy, respectively; OR 1503M
PTC-2AA	Pressure transducer recalibration, B & C grades, 0.25% and 0.1% accuracy, respectively, 5 points to 5 psig
PU	Low out-gassing triple splice assembly (3) 1 ft coaxial cable each to 3 EB connector
PW	BNC plug with gold plated pin
QM	Double splice to two BNC plugs, for 137B sensors with two outputs, labeled 'front' and 'rear'
QN	4-socket plug, Hex-shaped coupling nut
QX	10-32 coaxial plug, for Halt/Hass, with strain relief, stainless steel shell & hex nut Requires special tooling for assembly – No sales except PCB locations that have the tooling and procedures.
RB	IP68 rated version of AY (4-socket plug connector); For 034 & 078 cables only
RG	Triple splice assembly for 4-conductor cable to (3) 1-ft coaxial cables each to SMB right-angle plug
PRM2103-FF	Permanent outdoor preamplifier for Model 831 with remote calibration check, humidity reading and heater, 377B02 pre-polarized microphone. (CBL203 or CBL208 cables not included)
CBL203-20	Cable connecting the Model 831 sound level meter to PRM2103 - data/control/power (12V). (20ft)
PRM831	Model 831 sound level meter preamplifier for 1/2" free-field or random incidence prepolarized microphones
PRM831-FF	PRM831 with 377B02 microphone
RH134A	Tourmaline pressure bar, 10k psi, 0.12 pC/psi, charge output, 0.2 microsecond rise time, RoHS compliant
RH134A02	Tourmaline pressure bar, 20k psi, 0.1 pC/psi, charge output, 0.2 microsecond rise time, RoHS compliant
RH134A22	Tourmaline ICP® pressure bar, 5000 psi, 1 mV/psi, 0.2 microsecond rise time, RoHS compliant
RH134A23	Tourmaline ICP® pressure bar, 10k psi, 0.5 mV/psi, 0.2 microsecond rise time, RoHS compliant
RH134A24	Tourmaline ICP® pressure bar, 1000 psi, 5 mV/psi, 0.2 microsecond rise time, RoHS compliant
RH134A27	Tourmaline ICP® pressure bar, 20k psi, 0.25 mV/psi, 0.2 microsecond rise time, RoHS compliant
RH201A76	Low-profile, ICP force ring, 5k lb comp., 1 mV/lb, 5-44 conn., RoHS compliant
RH204C	ICP® quartz force ring, 40k lb comp., 0.12 mV/lb, RoHS compliant
RH356A02	Triaxial, general purpose, ceramic shear ICP® accel., 10 mV/g, 1 to 5k Hz, 14 mm cube size, 4-pin conn. RoHs compliant
RH401B04	ICP sensor simulator, for signal conditioner testing, RoHS compliant
RH483C40	8-channel, line-powered, ICP®/charge sensor signal cond gain selectable LPF Ethernet RoHS compliant
RH483C41	8-channel, line-powered, ICP®/charge sensor signal cond., gain, selectable LPF, Ethernet, keypad/display, RoHS compliant
RHM134A	Tourmaline pressure bar, 10k psi, 0.12 pC/psi, charge output, 0.2 microsecond rise time, RoHS compliant
RHM134A02	Tourmaline pressure bar, 20k psi, 0.1 pC/psi, charge output, 0.2 microsecond rise time, RoHS compliant
RHM240A01	Industrial dynamic strain sensor, ICP® quartz, 100 mV/microstrain, +/-50 microstrain range, M6 x 1 thd, RoHS compliant
RHM240A02	Industrial dynamic strain sensor, ICP® quartz, 50 mV/microstrain, +/-100 microstrain range, M6 x 1 thd, RoHS compliant
RHM240A03	Industrial dynamic strain sensor, ICP® quartz, 10 mV/microstrain, +/300 microstrain range, M6 x 1 thd, RoHS compliant
RJ	4-socket plug connector (for use with DC & triaxial sensors,) 200C rated
S101A06	General purpose ICP® pressure sensor, 500 psi, 10 mV/psi, 3/8-24 mtg thd, ground isolated 316 SS diaphragm
S111A22	General purpose ICP® pressure probe, 5000 psi, 1 mV/psi, 0.218" dia. diaphragm, accel. comp., stainless diaphragm
S111A26	General purpose ICP® pressure probe, 500 psi, 10mV/psi, 0.218" dia. diaphragm, accel comp, stainless diaphragm
S112A21	High resolution ICP® pressure probe, 100 psi, 50 mV/psi, 0.218" dia. diaphragm, accel. comp., stainless diaphragm
S112A22	High resolution ICP® pressure probe, 50 psi, 100 mV/psi, 0.218" dia. diaphragm, accel. comp., stainless diaphragm
S112A23	High resolution, low-noise ICP® pressure probe, 50 psi, 50 mV/psi, 0.218" dia. SS diaphragm, accel. comp.
S113B22	High frequency ICP® pressure sensor, 5000 psi, 1 mV/psi, 0.218" dia. diaphragm, accel. comp., stainless diaphragm
S113B23	High frequency ICP® pressure sensor, 10k psi, 0.5 mV/psi, 0.218" dia. diaphragm, accel. comp., stainless diaphragm
S113B24	High frequency ICP® pressure sensor, 1000 psi, 5 mV/psi, 0.218" dia. diaphragm, accel. comp., stainless diaphragm
S113B26	High frequency ICP® pressure sensor, 500 psi, 10 mV/psi, 0.218" dia. diaphragm, accel. comp., SS diaphragm
S113B28	High frequency ICP® pressure sensor, 50 psi, 100 mV/psi, 0.218" dia. SS diaphragm, accel. comp.
SM101A05	General purpose ICP® pressure sensor, 100 psi, 50 mV/psi, 3/8-24 mtg thd, ground isolated, metric mount, stainless steel diaphragm
SM102A07	High resolution ICP® pressure sensor, 50 psi, 100 mV/psi, M10 x1 mtg thd with jamb nut, accel. comp., ground isolated, SS diaphragm
SM102B06	High frequency ICP® pressure sensor, 500 psi, 10 mV/psi, M10 x 1.0 mtg thd, accel. comp., ground isolated, stainless steel diaphragm
TLD086C01	Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 100 lbf, 50 mV/lbf (11.2 mV/N), TEDS 1.0
TLD086C02	Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 100 lbf, 50 mV/lbf (11.2 mV/N), TEDS 1.0
TLD086C03	Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 500 lbf, 10 mV/lbf (2.2 mV/N), TEDS 1.0
TLD086C04	Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 1000 lbf, 5 mV/lbf (1.1 mV/N), TEDS 1.0
TLD086D05	Impact Hammer
TLD086D20	Short-sledge Impulse Hammer w/force sensor & tips, 0 to 5k lbf, 1 mV/lbf (0.23 mV/N), 2.4-lb head, TEDS 1.0
TLD086D50	Large-sledge Impulse Hammer w/force sensor & tips, 0 to 5k lbf, 1 mV/lbf (0.23 mV/N), 12-lb head, TEDS
TLD208C02	Multi-purpose, ICP® force sensor, 100 lb comp., 100 lb tension, 50 mV/lb with TEDS
TLD288D01	ICP® impedance head, force/accel: Force: 100 mV/lb, range +/- 50 lbs; Accel: 100 mV/g, 50 g range, TEDS 1.0
TLD333B	Modal array, ceramic shear ICP® accel, 100 mV/g, 2 to 1k Hz, 3-pin socket conn. mtg, TEDS version 1.0
TLD333B30	Modal array, ceramic shear ICP® accel, 100 mV/g, 0.5 to 3k Hz 10-32 side conn stud mount with IEEE 1451.4 TEDS 1.0
TLD333B31	Modal array, ceramic shear ICP® accel., 100 mV/g, 0.5 to 3k Hz, 10-32 electrical bottom conn., TEDS 1.0
TLD333B32	Modal array, ceramic shear ICP® accel, 100 mV/g, 0.5 to 3k Hz, 10-32 side conn., adhesive mount, TEDS version 1.0
TLD333B40	Modal array, ceramic shear ICP® accel, 500 mV/g, 0.5 to 3k Hz, 10-32 side conn., stud mount, TEDS 1.0
TLD333B50	Modal array, ceramic shear ICP® accel, 1000 mV/g, 0.5 to 3k Hz, 10-32 side conn., 5-40 stud mount, TEDS 1.0
TLD333B52	Modal array, ceramic shear ICP® accel, 1000 mV/g, 0.5 to 3k Hz, 10-32 side conn., adhesive mount, TEDS 1.0
TLD339A34	TEDS V1.0 Triaxial ICP® accelerometer, 50 mV/g, 2 to 5k Hz, titanium housing, 1/4-28, 4-pin, low temperature coefficient, 325F Temp Rating
TLD339A36	TEDS V1.0 Triaxial ICP® accelerometer, 10 mV/g, 2 to 5k Hz, titanium housing, 1/4-28, 4-pin, low temperature coefficient, 325F Temp Rating
TLD339A37	TEDS V1.0 Triaxial ICP accelerometer, 100 mV/g 2 to 5KHz, titanium housing, 1/4-28 pin low temperature coefficient, 365F temp rating
TLD339A37/NC	Triaxial ICP® accel, 100 mV/g 2 to 5k Hz, ti housing, 1/4-28 4-pin connector, TEDS 1.0. low temp coefficient LTC , +365F temp rating. No breakout cable included
TLD352A56	High sensitivity, miniature (1.8 gm), ceramic shear ICP® accel., 100 mV/g, with TEDS and 5-44 coaxial conn., TEDS Ver 1.0
TLD352A57	Miniature (1.33 gm), ceramic shear ICP® accel., 2.5 mV/g, with TEDS version 1.0 and 5-44 coaxial conn
TLD352A78	High resolution, ceramic shear ICP® accel., 100 mV/g, 5 to 15k Hz, 10-32 top conn., TEDS 1.0
TLD352B	High resolution, ceramic shear ICP® accel., 1000 mV/g, 2 to 10k Hz, 10-32 top conn., TEDS V1.0
TLD352C03	General purpose, ceramic shear ICP® accel., 10 mV/g, 0.5 to 10k Hz, 10-32 side conn., TEDS 1.0
TLD352C04	General purpose, ceramic shear ICP® accel., 10 mV/g, 0.5 to 10k Hz, 10-32 top conn., TEDS 1.0
TLD352C33	High sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 Hz to 10k Hz, 10-32 side conn., TEDS 1.0
TLD352C34	High sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 Hz to 10k Hz, 10-32 top conn., TEDS 1.0
TLD354C02	Triaxial, thru-hole mtg, ceramic shear ICP® accel., 10 mV/g, 0.5 to 2k Hz, ground isolated, 4-pin conn., TEDS 1.0
TLD354C03	Triaxial, thru-hole mtg, ceramic shear ICP® accel., 100 mV/g, 0.5 to 2k Hz, ground isolated, 4-pin conn., TEDS 1.0
TLD356A02	Triaxial, general purpose, ceramic shear ICP® accel., 10 mV/g, 1 to 5k Hz, 14 mm cube size, 4-pin conn., TEDS 1.0
TLD356A14	Triaxial ICP® Accel., 100 mV/g, 50 g, 0.5 to 5 kHz, ╝-28 Side Conn., 10-32 Female, Ti Housing, TEDS ver 1.0
TLD356A15	Triaxial, high sensitivity, ceramic shear ICP® accel., 100 mV/g, 2 to 5k Hz, titanium hsg, 4-pin conn., TEDS 1.0
TLD356A16	Triaxial, high sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 to 5k Hz, aluminum hsg, 4-pin conn., TEDS 1.0
TLD356A17	Triaxial, high sensitivity, ceramic shear ICP® accel., 500 mV/g, 0.5 to 3k Hz, aluminum hsg, 4-pin conn., TEDS 1.0
TLD356A25	Triaxial, general purpose, ceramic shear ICP® accel., 25 mV/g, 1 to 5k Hz, 4-pin conn. with TEDS Compliant with IEEE 1451.4
TLD356A26	Triaxial, general purpose, ceramic shear ICP® accel., 50 mV/g, 1 to 5k Hz, 4-pin conn., TEDS 1.0
TLD356A32	Triaxial, mini (5 gm) high sensitivity, ICP® accel., 100 mV/g, 1 Hz to 4k Hz, titanium hsg, 10 ft mating cable supplied, TEDS 1.0
TLD356A32/NC	Triaxial, mini (5 gm) high sensitivity, ICP® accel., 100 mV/g, 1 Hz to 4k Hz, titanium hsg, mini 4-pin conn, TEDS 1.0
TLD356B18	Triaxial, high sensitivity, ceramic shear ICP® accel., 1000 mV/g, 0.5 to 3k Hz, 4-pin conn., TEDS
TLD393B04	Seismic, miniature (50 gm), ceramic shear ICP® accel., 1 V/g, 0.06 to 450 Hz, 10-32 top connector with TEDS IEEE 1451.4
TLD393B05	Overview: Seismic, miniature (50 gm), ceramic shear ICP® accel., 10 V/g, 0.6 to 450 Hz, 10-32 top connector with TEDS IEEE 1451.4
TLD422E35	In-line charge converter, 1 mV/pC, +/-2.5V output, -5% frequency 5 Hz, TEDS 1.0, For high temp sensors (>500 F)
TLD422E36	In-line charge converter, 10 mV/pC, +/-2.5V output, -5% frequency 5 Hz, TEDS 1.0, For high temp sensors (>500 F)
TLD422E51	In-line charge converter, 100 mV/pC, +/-5V output, -5% frequency 5 Hz, TEDS IEEE 1451.4 option
TLD422E52	In-line charge converter, 10 mV/pC, +/-5V output, -5% frequency 5 Hz, TEDS IEEE 1451.4 option
TLD422E53	In-line charge converter, 1 mV/pC, +/-5V output, -5% frequency 5 Hz, TEDS IEEE 1451.4 option
TLD422E54	In-line charge converter, 0.1 mV/pC, +/-5V output, -5% frequency 5 Hz, TEDS IEEE 1451.4 option
TLD422E55	In-line charge converter, 0.5 mV/pC, +/-5V output, -5% frequency 5 Hz, TEDS IEEE 1451.4 option
TLD422E92/A	Slim in-line charge converter, 1 mV/pC, +/-5 V, -10% frequency 5 Hz, TEDS
TLD422E93/A	Slim in-line charge converter, 10 mV/pC, +/-5 V, -5% frequency 5 Hz, TEDS
TLDM354C03	Triaxial, thru-hole mtg, ceramic shear ICP® accel., 100 mV/g, 0.5 to 2k Hz, ground isolated, 4-pin conn., metric mtg, TEDS 1.0
W352B10	Miniature, lightweight (0.7 gm), ceramic shear ICP® accel., 10 mV/g, 2 to 10k Hz, 10-ft integral cable
W352C67	High sensitivity, miniature (2 gm), ceramic shear ICP® accel., 100 mV/g, 0.5 to 10k Hz, 10-ft attached cable
W353B17	High frequency, quartz shear ICP® accel., 10 mV/g, 1 to 10k Hz, 10-ft integral cable
356A03/030BZ/NC	Triaxial, ceramic shear ICP® accel., 5 grams, 100 mV/g, 0.5 to 5k Hz, 5 ft. integral sealed cable with water resistant option, 5 ft. extension cable to (3) BNC plugs
W356A12	Triaxial, ceramic shear ICP® accel., 5 grams, 100 mV/g, 0.5 to 5k Hz, 5 ft. integral sealed cable with water resistant option, 5 ft. extension cable to (3) BNC plugs
W356A61	Triaxial, miniature (4 gm), ceramic shear ICP® accel., 10 mV/g, built-in filter, 5-ft attached cable
W356B11	Triaxial, miniature (4 gm), ceramic shear ICP® accel., 10 mV/g, 2 to 7k Hz, 5 -ft attached cable
W356B11/030AD/NC	Triaxial, miniature (4 gm), ceramic shear ICP® accel., 10mV/g, 2 to 7k Hz Water Resistant integral cable 30ft
W352C33/003AA010AC	High sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 Hz to 10k Hz, Water resistant cable option, Low-noise coaxial cable, TFE jacket, 10-ft, BNC plug
W352C33/003AA020AC	High sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 Hz to 10k Hz, Water resistant cable option, Low-noise coaxial cable, TFE jacket, 20-ft, BNC plug
W352C33/003AA030AC	High sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 Hz to 10k Hz, Water resistant cable option, Low-noise coaxial cable, TFE jacket, 30-ft, BNC plug
W352C33/003AA050AC	High sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 Hz to 10k Hz, Water resistant cable option, Low-noise coaxial cable, TFE jacket, 50-ft, BNC plug
W352B/003AA010AC	High resolution, ceramic shear ICP® accel., 1000 mV/g, 2 to 10k Hz, Water resistant cable option, Low-noise coaxial cable, TFE jacket, 10-ft, BNC plug
W352B/003AA020AC	High resolution, ceramic shear ICP® accel., 1000 mV/g, 2 to 10k Hz, Water resistant cable option, Low-noise coaxial cable, TFE jacket, 20-ft, BNC plug
W352B/003AA030AC	High resolution, ceramic shear ICP® accel., 1000 mV/g, 2 to 10k Hz, Water resistant cable option, Low-noise coaxial cable, TFE jacket, 30-ft, BNC plug
W352B/003AA050AC	High resolution, ceramic shear ICP® accel., 1000 mV/g, 2 to 10k Hz, Water resistant cable option, Low-noise coaxial cable, TFE jacket, 50-ft, BNC plug
WHT356B01	Triaxial, lightweight miniature, ceramic shear ICP® accel., 5 mV/g, to +356 F (+180 C), watertight connection (incl 034G05)
WHT356B11	Triaxial, miniature (4 gm), ceramic shear ICP® accel., 10 mV/g, 2 to 7k Hz, 5 -ft attached cable, operation to +325 F
WS102B18/	High frequency ICP® pressure sensor, 3/8-24 mtg thd, accel. comp., ground isolated, with attached cable
WS113B22/	High frequency ICP pressure sensor, 5000 psi, 1 mV/psi, 0.218" dia. diaphragm, accel. comp., stainless diaphragm & W option
012025-20101	Rotary Torque Transducer, Small Housing, 4-Pin Receptacle, 100 lbf-in, 1/4-in Square Drive
027025-04021	Hand Torque Wrench, 20 in-lb (2.3 Nm), Screwdriver Handle, 1/4-inch Hex Drive, Integral Cable with pigtail leads
027025-04061	Hand Torque Wrench, 60 in-lb (6.9 Nm), Screwdriver Handle, 1/4-inch Hex Drive, Integral Cable with pigtail leads
027125-04012	HTW,100 IN-LB 8-IN HNDLE,1/4-IN SQ DR
027125-04051	HTW,50 IN-LB,8-IN HANDLE,1/4-IN SQ DR
027125-07012	HTAW,100 IN-LB,8-IN HANDLE,1/4-IN SQ DR
027137-04022	HTW,200 IN-LB,12-IN HANDLE,3/8-IN SQ DR
027137-04051	HTW,50 FT-LB,12-IN HANDLE,3/8-IN SQ DR
027137-07022	HTAW,200 IN-LB,12-IN HANDLE,3/8-IN SQ DR
027137-07051	HTAW,50 FT-LB,12-IN HANDLE,3/8-IN SQ DR
027250-04101	HTW,100 FT-LB,21-IN HANDLE,1/2-IN SQ DR
027250-04201	HTW,200 FT-LB,21-IN HANDLE,1/2-IN SQ DR
027250-04301	HTW,300 FT-LB,34-IN HANDLE,1/2-IN SQ DR
027250-07101	HTAW,100 FT-LB,21-IN HANDLE,1/2-IN SQ DR
027250-07201	HTAW,200 FT-LB,21-IN HANDLE,1/2-IN SQ DR
027250-07301	HTAW,300 FT-LB,34-IN HANDLE,1/2-IN SQ DR
027375-04501	HTW,500 FT-LB,43-IN HANDLE,3/4-IN SQ DR
027375-04601	HTW,600 FT-LB,43-IN HANDLE,3/4-IN SQ DR
027375-07501	HTAW,500 FT-LB,43-IN HANDLE,3/4-IN SQ DR
039001-01103	ROTARY TORQ, 10,000 NM, 1 1/2-IN SQ DR
039001-53033	ROTARY TORQ, 3,000 FT-LB, 1-IN SQ DR
039001-53102	ROTARY TORQ, 1,000 FT-LB, 1-IN SQ DR
039025-50051	ROTARY TORQ, 50 IN-LB, 1/4-IN SQ DR
039025-50101	ROTARY TORQ, 100 IN-LB, 1/4-IN SQ DR
039030-50002	PCB L&T Rotary Torque Only Transducer, w/Auto-ID, 32 ozf-in (0.23 Nm), 1/4-inch Hex Drive, 10-pin PT Receptacle
039030-50021	ROTARY TORQ, 20 IN-LB, 1/4-IN HEX DR
039030-50101	ROTARY TORQ, 100 IN-LB, 1/4-IN HEX DR
039037-50022	PCB L&T Rotary Torque Only Transducer, w/Auto-ID, 200 lbf-in (22.6 Nm), 3/8-inch Square Drive, 10-pin PT Receptacle
039037-50051	PCB L&T Rotary Torque Only Transducer, w/Auto-ID, 50 lbf-ft (68 Nm), 3/8-inch Square Drive, 10-pin PT Receptacle
039050-50101	ROTARY TORQ, 100 FT-LB, 1/2-IN SQ DR
039050-51201	PCB L&T Rotary Torque Only Transducer, w/Auto-ID, 200 Nm (148 lbf-ft), 1/2-inch Square Drive, 10-pin PT Receptacle
039075-50301	ROTARY TORQ, 300 FT-LB, 3/4-IN SQ DR
039075-51501	ROTARY TORQ, 500 NM, 3/4-IN SQ DR
039075-53601	ROTARY TORQ, 600 FT-LB, 3/4-IN SQ DR
039201-01302/B	ROTARY TA, 3,000 NM, 1-IN SQ DR
039201-53102/B	ROTARY TA, 1,000 FT-LB, 1-IN SQ DR
039201-53302/B	ROTARY TA, 3,000 FT-LB, 1-IN SQ DR
039225-50051/B	Rotary Torque Angle Transducer, w/Auto-ID, 50 lbf-in (5.6 Nm), 1/4-inch Square Drive, 10-pin PT Receptacle
039225-50101/B	ROTARY TA, 100 IN-LB, 1/4-IN SQ DR
039225-51015/B	ROTARY TA, 15 NM, 1/4-IN SQ DR
039230-50002/B	ROTARY TA ,32 OZ-IN, 1/4-IN HEX DR
039230-50021/B	ROTARY TA, 20 IN-LB, 1/4-IN HEX DR
039230-50101/B	ROTARY TA, 100 IN-LB, 1/4-IN HEX DR
039230-51015/B	ROTARY TA, 15 NM, 1/4-IN HEX DR
039237-50022/B	ROTARY TA, 200 IN-LB, 3/8-IN SQ DR
039237-50051/B	ROTARY TA, 50 FT-LB, 3/8-IN SQ DR
039250-50101/B	ROTARY TA, 100 FT-LB, 1/2-IN SQ DR
039250-51201/B	ROTARY TA, 200 NM, 1/2-IN SQ DR
039275-50301/B	ROTARY TA, 300 FT-LB, 3/4-IN SQ DR
039275-51501/B	ROTARY TA, 500 NM, 3/4-IN SQ DR
039275-53601/B	ROTARY TA, 600 FT-LB, 3/4-IN SQ DR
039301-01103	ROTARY TA, 10,000 NM, 1 1/2-IN SQ DR
054103-01252	ENGLISH SIZE FORCE WASHER, #10, 2.5 KLBF
054103-01252/015AD	PCB L&T Fastener Force Washer, English, #10, 2.5 klbf (11.1 kN), 15-ft Integral Cable w/pigtails
054104-01502	ENGLISH SIZE FORCE WASHER, 1/4-IN, 5 KLB
054104-01502/020	Fastener Load Washer, English, 1/4-in, 5 klbf (22 kN), 20-ft Integral Cable w/pigtails
054105-01802	ENGLISH SIZE FORCE WASHER, 5/16-IN, 8 KL
054106-01103	ENGLISH SIZE FORCE WASHER, 3/8-IN, 10 KL
054106-01103/005DSUB9M	Fastener Force Washer, English, 3/8-in, 10 klbf (44.5 kN), 5-ft Integral Cable to 9-pin male DSUB connector for 8159 instrument.
054107-01153	ENGLISH SIZE FORCE WASHER, 7/16-IN, 15 K
054108-01203	ENGLISH SIZE FORCE WASHER, 1/2-IN, 20 KL
054108-01203/020	Fastener Load Washer, English, 1/2-in, 20 klbf (89 kN), 20-ft Integral Cable w/pigtails
054109-01253	ENGLISH SIZE FORCE WASHER, 9/16-IN, 25 K
054109-01253/005DSUB9M	Fastener Force Washer, English, 9/16-in, 25 klbf (111.2 kN), 5-ft Integral Cable to 9-pin male DSUB connector for 8159 instrument.
054110-01203/020	Fastener Force Washer, English, 5/8-in, 30 klbf (133.4 kN), 20-ft Integral Cable w/pigtails
054110-01303	ENGLISH SIZE FORCE WASHER, 5/8-IN, 30 KL
054110-01303/005DB15P	Fastener Force Washer, English, 5/8-in, 30 klbf (133.4 kN), 5-ft Integral Cable to 15-pin DB connector for RS instrument.
054112-01403	ENGLISH SIZE FORCE WASHER, 3/4-IN, 40 KL
054112-01403/020	Fastener Load Washer, English, 13/4-in, 40 klbf (177.9 kN), 20-ft Integral Cable w/pigtails
054114-01603	ENGLISH SIZE FORCE WASHER, 7/8-IN, 60 KL
054114-01603/020AD	PCB L&T Fastener Force Washer, English, 7/8-in, 60 klbf (266.9 kN), 20-ft Integral Cable w/pigtails
054116-01803	ENGLISH SIZE FORCE WASHER, 1-IN, 80 KLBF
054116-01803/005PT10P	Fastener Load Washer, English 1-inch, 80.0 kLBS (335.6 kN), 5-ft Integral Cable w/10-pin PT Connector wired for LabMaster Model 3210
054116-01803/020	Fastener Load Washer, English, 1/2-in, 1-in, 80 klbf (355.6 kN), 20-ft Integral Cable
054204-01093	METRIC SIZE FORCE WASHER, M4, 9 KN
054204-01093/005DSUB9M	Fastener Load Washer, Metric M4, 9 kN (2,023 lbf), 5-foot Integral Cable w/9-pin DSUB Connector wired for Series 8159 Signal Conditioner
054204-01093/020	Fastener Force Washer, Metric, M4, 9 kN (2 klbf), 20ft Integral Cable w/pigtails
054206-01203	Fastener Load Washer, Metric, M6, 20 kN (4496 lbf), 5-ft Integral Cable w/pigtails
054206-01203/005DB15P	Fastener Load Washer, Metric M6, 20 kN (4,496 lbf), 5-ft Integral Cable w/15Pin DB Connector for RS Instruments
054208-01353	Fastener Load Washer, Metric, M8, 35 kN (7869 lbf), 5-ft Integral Cable w/pigtails
054208-01353/020	PCB L&T Fastener Force Washer, Metric, M8, 35 kN (7869 lbf), 20-ft Integral Cable w/pigtails
054210-01543	METRIC SIZE FORCE WASHER, M10, 54 KN
054210-01543/010AD	Fastener Force Washer, Metric, M10, 54 kN (12.1 klbf), 10-ft Integral Cable w/ pigtails
054210-01543/010DB15P	Fastener Force Washer, Metric, M10, 54 kN (12.1 klbf), 10-ft Integral Cable to 15-pin DB connector for RS instrument.
054210-01543/020AD	Fastener Force Washer, Metric, M10, 54 kN (12.1 klbf), 20-ft Integral Cable w/ pigtails.
054210-01543/020DB15P	Fastener Force Washer, Metric, M10, 54 kN (12.1 klbf), 20-ft Integral Cable to 15-pin DB connector for RS instrument.
054212-01084	METRIC SIZE FORCE WASHER, M12, 80 KN
054212-01084/005DB15P	Fastener Load Washer, Metric, M12, 80 kN (17.9 kLbf) 5-ft Integral Cable with 15P Connector
054212-01084/005DSUB9M	Fastener Force Washer, Metric, M12, 80 kN (17.9 klbf), 5-ft Integral Cable to 9-pin male DSUB connector for 8159 instrument.
054214-01114	METRIC SIZE FORCE WASHER, M14, 110 KN
054214-01114/020	PCB L&T Fastener Force Washer, Metric, M14, 110 kN (24.7 klbf), 20-ft Integral Cable w/pigtails
054216-01144	METRIC SIZE FORCE WASHER, M16, 140 KN
054216-01144/005PT10P	Fastener Load Washer, Metric, M16, 140 kN (31.4 kLBS), 5-ft Integral Cable w/10-pin PT Connector wired for LabMaster Model 3210
054220-01224	METRIC SIZE FORCE WASHER, M20, 220 KN
054220-01224/005PT10P	Fastener Load Washer, Metric, M20, 220 kN (49.5 kLBS), 5-ft Integral Cable w/10-pin PT Connector wired for LabMaster Model 3210
054220-01224/020	PCB L&T Fastener Force Washer, Metric, M20, 220 kN (44.5 klbf), 20-ft Integral Cable w/pigtails
054220-01224/020AD	Fastener Load Washer, Metric, M20, 220 kN (49.5 kLBS), 20-ft Integral Cable w/pigtail leads
054222-01274	METRIC SIZE FORCE WASHER, M22, 270 KN
054224-01324	METRIC SIZE FORCE WASHER, M24, 320 KN
054224-01324/020AD	Fastener Force Washer, Metric, M24, 320 kN (71.9 klbf), 20-ft Integral Cable w/ pigtails
054230-01404/005DB15P	Fastener Force Washer, Metric, M30, 400 kN 89.9 klbf), 5-ft Integral Cable to 15-pin DB connector for RS instrument.
054230-01404/005PT10P	Fastener Load Washer, Metric, M30, 400 kN (89.9 kLBS), 5-ft Integral Cable w/10-pin PT Connector wired for LabMaster Model 3210
054230-01404/020AD	Fastener Force Washer, Metric, M30, 400 kN (89.9 klbf), 20-ft Integral Cable w/ pigtails
059400-01024	TORQUE TENSION LOAD CELL, 20 KN, 20 NM
059500-01044	TORQUE TENSION LOAD CELL, 40 KN, 60 NM
059600-01104	TORQUE TENSION LOAD CELL, 100 KN, 150 NM
059600-02154	Load Cell, Torque Tension, Wheel Nut Test Stand, Clamp Load rated capacity 150 kN (33,720 lb), Thread Torque rated capacity 300 Nm (221 ft-lb) 10-pin PT Receptacle
059625-01304	TORQUE TENSION LOAD CELL, 300 KN, 800 NM
059810-01104	CLAMP FORCE LOAD CELL, 100 KN
059810-01253	CLAMP FORCE LOAD CELL, 25 KN
059810-01304	CLAMP FORCE LOAD CELL, 300 KN
059810-01504	CLAMP FORCE LOAD CELL, 500 KN
077037-00051	STAT TORQ, 50 FT-LB, 3/8-IN SQ DR
080900-02200	Battery Charger, Model 920/962, 18 VDC, Universal 94-210 VAC.
080920-01000	Model 920 Portable Digital Peak Meter for torque, torque-angle or load measurement; Click-Wrench calc feature, w/battery charger, instruction manual & shoulder strap
080920-02000	Model 920 Portable Digital Peak Meter w/10 Limit Sets for torque, torque-angle or load measurement; w/battery charger, instruction manual & shoulder strap
080962-01000	PCB L&T Model 962 Portable Transient Recorder, complete with battery and charger, carrying case, and serial cable for PC upload/download.
083200-01000	MODEL 3200 LABMASTER PROFESSIONAL
083210-01000	MODEL 3210 LABMASTER PORTABLE
085010-33524	STRAIN GAGE AMPLIFIER CARD
089120-01000	FASTTEST DC MOTOR & CONT,1485 NM 74 RPM
089200-00524	Drive Motor & Servo, LabMaster Fastener Test System, Cooper #571222 Motor 54 Nm (40 ft-lb) 614 RPM
089200-00528	FASTTEST DC MOTOR & CONT,260 NM 127 RPM
089400-00606	FASTTEST DC MOTOR & CONT,391 NM 192 RPM
089600-00621	FASTTEST DC MOTOR & CONT,781 NM 102 RPM
08CLEC-02MTR	BASIC FASTTEST MOTOR 610 NM 55 RPM
08SR1E-01000	Fastener Test, Tool Test, and Joint Design Software, SR1+ Bolted Joint Design Program w/Training & Technical Support
08SR1E-01000/PLUS	SR1+ Bolted Joint Design & Analysis Software, Single-workstation License
08SR1E-02000	Fastener Test, Tool Test, and Joint Design Software, SR1 Program Update
08SR1E-02000/PLUS	SR1 Bolted Joint Software Upgrade to SR1+
08SR1E-05001	SR1 Bolted Joint Design & Analysis Software, 1-User Network Version
08SR1E-05001/PLUS	SR1+ Bolted Joint Design & Analysis Software, 1-User Floating Network License
090900-31163	CABLE,BENDIX 10S TO PIGTAIL 20 FT
090970-31583	CABLE,BENDIX 4S TO PIGTAIL 6 FT
090970-31583/10	Cable, RS Transducer, PT 4S to Pigtail 10-feet straight
093210-49585	TRANSDUCER CABLE, PT-10S TO PT-10P, 10F
093210-49586	CABLE, LM3210 TO TORQ-TENS LC 10 FT
097000-00016	CABLE RS TO PT-10P,16' STRAIGHT
097000-00016/15S/10	Cable, DB-15P to DB-15S, RST Instrument to DB-15P Transducer w/Auto-ID, 10-feet, Straight
097000-0015P	RS DA Connector, DA-15P Cinch Connector, w/AMP Strain Relief & Thumbscrews
097000-34149	Cable, RS Instrument to 4-pin Transducers
097000-34445	Cable, RS Instrument to 10-pin Transducers
097000-34779-ID	Cable, RST Instr to 6-Pin Load Cells w/Auto-ID
098159-50700	Cable, RS Transducer PT-10S to Series 8159 DB-9P, 10-feet straight.
099000-31941	T/A CH.O CBL TO VAR.GAIN BOX
099404-30563	CABLE, LABMASTER TO 10-PIN XDUCERS 10 FT
099404-30564	MODEL 9404 I/O CABLE #30564
099404-30566	CABLE, LABMASTER TO TORQ-TENS LC 10 FT
099404-30610	CABLE,LABMASTER TO 4-PIN LOAD CELL 10 FT
099404-34011	Cable, LabMaster to 4-pin Load Cell 3-feet Straight
099404-34779	CABLE,RST INSTR TO 6-PIN TRANSDUCERS
099504-31843	Cable, LabMaster to 6-pin Transducer, 10-feet Straight
09RS00-33732	Cable, RS Transducer, PT 6S to Pigtail 16-feet straight
100008-02000	#8 English fastener test plate set
100010-02000	Fastener Testing Plate Set, Standard, #10. Special product made to order and subject to special treatment under PCB Terms and Conditions.
1000M4-30428	FASTENER TESTING PLATE SET, STD, M4
1000M6-30429	FASTENER TESTING PLATE SET, STD, M6
1000M8-30430	FASTENER TESTING PLATE SET, STD, M8
100-14947-30	SOCKET ADAPTER 1" SQ F to 3/4" SQ M
100-15676-50	SOCKET ADAPTER 1 1/2"SQ F to 1" SQ M
100250-02000	Fastener Testing Plate Set, Standard, 1/4-in
100313-02000	Fastener Testing Plate Set, Standard, 5/16-in
100375-02000	Fastener Testing Plate Set, Standard, 3/8-in
100438-02000	Fastener Testing Plate Set, Standard, 7/16-in
100500-02000	Fastener Testing Plate Set, Standard, 1/2-in
100563-02000	Fastener Testing Plate Set, Standard, 9/16-in
100625-02000	5/8" PLATE SET, STD
100750-02000	Fastener Testing Plate Set, Standard, 3/4-in
100875-02000	7/8" TEST PLATE SET UNHARDENED
100M10-30431	FASTENER TESTING PLATE SET, STD, M10
100M12-30432	FASTENER TESTING PLATE SET, STD, M12
100M14-30433	FASTENER TESTING PLATE SET, STD, M14
100M16-30434	FASTENER TESTING PLATE SET, STD, M16
100M18-30435	FASTENER TESTING PLATE SET, STD, M18
100M20-30436	FASTENER TESTING PLATE SET, STD, M20
100m24-30439	FASTENER TESTING PLATE SET, STC, M24
101000-02000	Fastener Testing Plate Set, Standard, 1-in
101000-03000	Fastener Testing Test Plate Set, 1-inch Fasteners, Large Load Cell
101375-03000	Fastener Testing Plate Set, Standard Hardness, 1-3/8" Fasteners, Large Load Cell
102000-02201	JOINT SIMULATOR, 20-200 NM
102145-00001	Snap On X4 Torque Multiplier, for use with Complete Fastener Test System
102145-54006	Wheel Nut Test Stand
102145-G1000	Torque Multiplier, Geartronics, 4:1, 2,713 Nm max Torque Output, 3/4" SQ (F) input by 1" SQ (M) output
102145-G1500	Torque Multiplier, Geartronics, 4.3:1, 4,000 lbf-ft torque output max., 1" SQ. (F) in X 1 1/2" SQ. (M) out.
102145-G2500	X6 Torque Multiplier, Geartronics Model TD-2500, 6:1 Ratio, 7,999 lb-ft Torque Output Max.
109100-01440	TABLETOP SINGLE SLIDE ASSY SHORT
109480-34033	TABLETOP DUAL SLIDE ASSEMBLY
109480-34033/SLOT	Tabletop Dual Slide Assembly, Fastener Test System, Long Base, with slot for multiplier
109810-00100	Load Cell, Clamp Force Sensor for turntable mount, rated to 700 kN, 4-pin PT electrical receptacle.
21170-0007P2	Model 920 Replacement Battery
38180-000960	Model 960 Carrying Case
7122R-04352A	PRECISION CAL RESISTOR 43.575K OHM
8311-RS-10A	Load Cell Cable Assembly, DB-15P to 6-position PT connector, 10-feet straight, connects 6-pin Load Cell to RS Instrument
8311-RS-10A/4.5MV/V	Load Cell Cable Assembly, DB-15P to 6-position PT connector, 10-feet straight, connects 6-pin Load Cell Up to 4.5 mV/V to RS Instrument.
92160-658912	Small Transducer Shipping Box, Plastic Case, Foam Padding
92160-658914	Large Transducer Shipping Box, Plastic Case, Foam Padding
92300-063972	RUNDOWN ADAPTER, 5-50 IN-LB, 1/4" SQ DR
92300-063973	RUNDOWN ADAPTER, 10-100 IN-LB,1/4" SQ DR
92300-063978	RUNDOWN ADAPTER, 5-50 FT-LB, 3/8" SQDR
92310-037454	Replacement Pin, Hand Torque Wrenches, 1/2-inch Square Drive (sold as a set with Spring & Plug)
92310-037483	Replacement Pin, Hand Torque Wrenches, 3/8-inch Square Drive (sold as a set with Spring & Plug)
92310-037567	Replacement Plug, Hand Torque Wrenches, 3/8-inch Square Drive (sold as a set with Spring & Pin)
92310-037568	Replacement Plug, Hand Torque Wrenches, 1/2-inch Square Drive (sold as a set with Pin & Spring)
92330-180022	Replacement Spring, Hand Torque Wrenches,3/8-inch Square Drive (sold as a set with Pin & Plug)
92330-180026	Replacement Spring, Hand Torque Wrenches, 1/2-inch Square Drive (sold as a set with Pin & Plug)
92340-001100	Replacement Pin Capsule, Hand Torque Wrenches, 1/4-inch Square Drive
9412R-002200	Model 920/960 Battery Charger, 18 VDC
SERVICE-F1XX	TENSION OR COMPRESSION <1000LBF
SERVICE-F2XX	TENSION & COMPRESSION <1000LBF
SERVICE-F3XX	TENSION OR COMP. 1,000-10,000
SERVICE-F4XX	TENSION & COMP. 1,000-10,000
SERVICE-F5XX	TENSION OR COMP. 10,001-20,000
SERVICE-F6XX	TENSION & COMP. 10,001-20,000
SERVICE-F7XX	TENSION OR COMP.20,001-100,000
SERVICE-F8XX	TENSION &COMP. 20,001-100,000
SERVICE-M2A1	CALIBRATION 40 KN TT LOAD CELL (CW)
SERVICE-M2A2	CALIBRATION 100 KN TT LOAD CELL (CW)
SERVICE-M2A3	CALIBRATION 300 KN TT LOAD CELL (CW)
SERVICE-M2A4	CALIBRATION 600 KN TT LOAD CELL (CW)