Platinum Low-cost Industrial ICP® Accelerometer Model 603C01

Platinum Low-cost Industrial ICP® Accelerometer

Model 603C01

Add to Quote

• Product Description
• Specifications
• Documents & Downloads

Specification Notes

---

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.

	English:	SI:
Performance
Sensitivity (±10 %)	100 mV/g	10.2 mV/(m/s²)	[1]
Measurement Range	±50 g	±490 m/s²
Frequency Range (±3 dB)	30 to 600000 cpm	0.5 to 10000 Hz	[3]
Resonant Frequency	1500 kcpm	25 kHz	[4]
Broadband Resolution (1)	350 µg	3434 µm/sec2	[4]
Non-Linearity	±1 %	±1 %	[2]
Transverse Sensitivity	≤7 %	≤7 %
Environmental
Overload Limit (Shock)	5000 g pk	49050 m/s² pk
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[4]
Enclosure Rating	IP68	IP68
Electrical
Settling Time (within 1% of bias)	≤2.0 sec	≤2.0 sec
Discharge Time Constant	≥0.3 sec	≥0.3 sec
Excitation Voltage	18 to 28 VDC	18 to 28 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	<150 Ohm	<150 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Broadband Electrical Noise (1 to 10000 Hz)	5 µV	5 µV	[4]
Spectral Noise (10 Hz)	8 µg/√Hz	78.5 (µm/sec2)/√Hz	[4]
Spectral Noise (100 Hz)	5 µg/√Hz	49.1 (µm/sec2)/√Hz	[4]
Spectral Noise (1 kHz)	4 µg/√Hz	39.2 (µm/sec2)/√Hz	[4]
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Size - Hex	11/16 in	18 mm
Size - Height	1.65 in	42.2 mm
Weight	1.8 oz	51 gm
Mounting Thread	1/4-28 Female	No Metric Equivalent	[5]
Mounting Torque	2 to 5 ft-lb	2.7 to 6.8 Nm
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Stainless Steel	Stainless Steel
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	2-Pin MIL-C-5015	2-Pin MIL-C-5015
Electrical Connection Position	Top	Top

* All specifications are at room temperature unless otherwise specified.

Accessories

---

Supplied
081A40	Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip	1
ICS-2	Calibration of industrial accel., single-point, 100 Hz reference sensitivity	1

Optional Versions

---

(EX) Hazardous Area Approval- contact factory for specific approvals

	English	SI
Hazardous Area Approval	EEx nL IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 1 G
Hazardous Area Approval	Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval	Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval	Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval	EEx nL IIC 1T4, -40 = Ta = 121°C, II 3 G

(M) Metric Mount

Accessories:
Supplied	M081A61	Mounting Stud	1

(TO) Temperature Output

	English	SI
Temperature Output Range	+36 to +250 °F	+2 to +121 °C
Temperature Scale Factor	5.56 mV/°F + 32	+10 mV/°C
Electrical Connector	3-Pin MIL-C-5015
Electrical Connections	Acceleration Output
Electrical Connections	Temperature Output
Electrical Connections	Ground
Size - Height	1.86 in	47.2
Weight	2.0 oz	56.7

 

PCB Piezotronics / IMI Sensors 국내총판대리점 - 케이티엠엔지니어링

PCB Piezotronics / IMI Sensors Domestic Distributor - KTM Engineering

PCB Piezotronics / IMI Sensors Exclusive distributor in Korea - KTM Engineering

​

산업용 센서 / 진동센서 / 진동엔지니어링 / PCB진동센서 / PCB가속도센서 / PCB사진동센서 / PCB사가속도센서 / IMI진동센서 / IMI가속도센서 /

TMS진동캘리브레이터 / TMS Proximity Transducer Calibrator / TMS Portable Vibration Calibrator

-> 케이티엠엔지니어링이 정식 한국대리점입니다.

​

PCB Piezotronics의 사업부인 IMI Sensors, THE MODAL SHOP 은 가속도계, 진동 트랜스미터 및 진동캘리브레이터 같은 산업용 진동 모니터링 기기의 글로벌 설계 및 제조업체입니다.

​

국내독점 정식대리점에서 고객 맞춤 서비스를 제공하여 드립니다.

​

진동, 변위, 하중, 응력 (유, 무선) 측정 전문업체

​

​

(주)케이티엠엔지니어링

전화: 031-628-6078

메일: dyk@ktme.com ｜홈페이지: http://www.ktmeng.com

주소: 경기도 성남시 분당구 대왕판교로 670 유스페이스2 B동 808호