PCB IMI 국내독점 총판대리점 / 케이티엠엔지니어링

PCB, IMI社 국내총판독점대리점

PCB IMI 국내독점 총판대리점 / 케이티엠엔지니어링

PCB, IMI 진동 가속도 센서 한국대리점 (KTM) 2025. 4. 24. 14:45

PCB Piezotronics / IMI Sensors 국내총판대리점 - 케이티엠엔지니어링

PCB Piezotronics / IMI Sensors Domestic Distributor - KTM Engineering

PCB Piezotronics / IMI Sensors Exclusive distributor in Korea - KTM Engineering

산업용 센서 / 진동센서 / 진동엔지니어링 / PCB진동센서 / PCB가속도센서 / PCB사진진동센서 / PCB사가속도센서 / IMI진동센서 / IMI가속도센서 /

TMS진동캘리브레이터 / TMS Proximity Transducer Calibrator / TMS Portable Vibration Calibrator

-> 케이티엠엔지니어링이 정식 한국대리점입니다.

PCB Piezotronics의 사업부인 IMI Sensors, THE MODAL SHOP 은 가속도계, 진동 트랜스미터 및 진동캘리브레이터 같은 산업용 진동 모니터링 기기의 글로벌 설계 및 제조업체입니다.

국내독점 정식대리점에서 고객 맞춤 서비스를 제공하여 드립니다.

진동, 변위, 하중, 응력 (유, 무선) 측정 전문업체

(주)케이티엠엔지니어링

전화: 031-628-6078

메일: dyk@ktme.com ｜홈페이지: http://www.ktmeng.com

주소: 경기도 성남시 분당구 대왕판교로 670 유스페이스2 B동 808호

356A03/NC	Platinum Stock Products; Triaxial, lightweight miniature, ceramic shear ICP® accel., 10 mV/g, 0.25" cube, no extension cable provided
356A04	Triaxial, lightweight miniature, ceramic shear ICP® accel., 1.0 mV/g, 0.25" cube, 5 ft. integral cable to 4-pin jack +325F (163C) operating temp
356A04/NC	Triaxial, lightweight miniature, ceramic shear ICP® accel., 1.0 mV/g, 0.25" cube, 5 ft. integral cable to 4-pin jack, no mating cable supplied
356A05	Triaxial, lightweight miniature, ceramic shear ICP® accel., 0.25 mV/g, 0.25" cube, 5 ft. integral cable to 4-pin jack +325F (163C) operating temp
356A05/NC	Triaxial, lightweight miniature, ceramic shear ICP® accel., 0.25 mV/g, 0.25" cube, 5 ft. integral cable to 4-pin jack, no mating cable supplied
356A12	Triaxial ICP® accelerometer, 100 mV/g, 50 g, 0.5 to 5k Hz, 5gm, 5 foot attached cable
356A12/NC	Triaxial ICP® accelerometer, 100 mV/g, 50 g, 0.5 to 5k Hz, 5gm
356A13	Triaxial, lightweight (1.0 gm) miniature, ceramic shear ICP® accel., 5mV/g, 0.25" cube with flexible integral cable
356A13/NC	Triaxial, lightweight (1.0 gm) miniature, ceramic shear ICP® accel., 5mV/g, 0.25" cube, 5 ft. flexible integral cable to 4-pin jack, no mating cable supplied
356A14	Triaxial ICP® Accel., 100 mV/g, 50 g, 0.5 to 5 kHz, 1/4-28 Side Conn., 10-32 Female, Ti Housing
356A15	Platinum Stock Products; Triaxial, high sensitivity, ceramic shear ICP® accel., 100 mV/g, 2 to 5k Hz, titanium hsg, 4-pin conn.
356A16	Platinum Stock Products; Triaxial, high sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 to 5k Hz, aluminum hsg, 4-pin conn.
356A16/ACS-4T	Platinum Stock Products; Triaxial, high sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 to 5k Hz, aluminum hsg, 4-pin conn. low frequency phase & amplitude response calibration from 0.5 to 10 Hz
356A17	Platinum Stock Products;Triaxial, high sensitivity, ceramic shear ICP® accel., 500 mV/g, 0.5 to 3k Hz, aluminum hsg, 4-pin conn.
356A22/NC	Triaxial, miniature (5 gm) high sensitivity ICP® accel., 100 mV/g, 0.5 to 4k Hz, titanium hsg, mini 4-pin conn., no supplied mating cable
356A24	Triaxial, low-profile, ceramic shear ICP® accel., 10 mV/g, 1 to 9k Hz, titanium hsg, mini 4-pin conn.
356A24/NC	Triaxial, low-profile, ceramic shear ICP® accel., 10 mV/g, 1 to 9k Hz, titanium hsg, mini 4-pin conn., no supplied mating cable
356A25	Platinum Stock Products;Triaxial, general purpose, ceramic shear ICP® accel., 25 mV/g, 1 to 5k Hz, 4-pin conn.
356A26	Triaxial, general purpose, ceramic shear ICP® accel., 50 mV/g, 1 to 5k Hz, 4-pin conn.
356A30	Triaxial ICP® Accel., 5 mV/g, 1k g, 0.5 to 7 kHz, 4.5 gm, 8-36 4-pin conn., adhesive mt., Titanium Hsg w/034K10
356A30/NC	Triaxial ICP® Accel., 5 mV/g, 1k g, 0.5 to 7 kHz, 4.5 gm, 8-36 4-pin conn., adhesive mt., Titanium Hsg without cable
356A31	Triaxial ICP® accel., 10 mV/g, 500 g, 1 to 7 kHz, 4.5 gm, 8-36 4-pin conn., adhesive mtg., titanium hsg
356A31/NC	Triaxial ICP® accel., 10 mV/g, 500 g, 1 to 7 kHz, 4.5 gm, 8-36 4-pin conn., adhesive mtg., titanium hsg, no mating cable supplied
356A32	Platinum Stock Products; Triaxial, mini (5 gm) high sensitivity, ICP® accel., 100 mV/g, 1 Hz to 4k Hz, titanium hsg, 10 ft mating cable supplied
356A32/NC	Platinum Stock Products; Triaxial, mini (5 gm) high sensitivity, ICP® accel., 100 mV/g, 1 Hz to 4k Hz, titanium hsg, no mating cable supplied, mini 4-pin conn, TEDS 1.0
356A33	Platinum Stock Products; Triaxial, ceramic shear ICP® accel., 10 mV/g, 2 to 7k Hz, titanium hsg, 1/4-28 4-pin conn.
356A33PBO	Placebo (356A33)
356A43	Platinum Stock Product; Triaxial ICP® accel., 10 mV/g, 500 g, 1/4-28 4-pin connector, Adhesive mount, TEDS 1.0
356A44	Platinum Stock Product; Triaxial ICP® accel., 50 mV/g, 100 g, 1/4-28 4-pin connector, Adhesive mount, TEDS 1.0
356A45	Platinum Stock Product; Triaxial ICP® accel., 100 mV/g, 50 g, 1/4-28 4-pin connector, Adhesive mount, TEDS 1.0
356A61	Triaxial, miniature (4 gm), ceramic shear ICP® accel., 10 mV/g, built-in filter, 5-ft attached cable
356A63	Triaxial, miniature (5.3 gm), ceramic shear ICP® accel., 10 mV/g, 2 to 4k Hz, titanium hsg., 1/4-28 4-pin conn w/ built in filter
356A66	Triaxial, ceramic shear ICP® accel., 10 mV/g, 2 to 4 kHz, 14 mm cube size, w/built-in filter
356A67	Triaxial ICP® Accel., 10 mV/g, 500 g, 0.5 to 2.5 kHz, 1/4-28 4-pin conn., 10-32 Female mtg., w/filter.
356A70	Platinum Stock Products;Triaxial, miniature (8 gm), charge output accel., 2.7 pC/g, 5k Hz, (3) 5-44 conn.
356A71	Triaxial, miniature (23 gm) charge output accel., 10 pC/g, 5k Hz, (3) 10-32 conn.
356B10	Triaxial ICP® Accel., 1 mV/g, 5000 g, 2 to 7 kHz, 5 ft integral cable
356B10/NC	Triaxial ICP® Accel., 1 mV/g, 5000 g, 2 to 7 kHz
356B11	Triaxial, miniature (4 gm), ceramic shear ICP® accel., 10 mV/g, 2 to 7k Hz, 5 -ft attached cable
356B11/NC	Triaxial, miniature (4 gm), ceramic shear ICP® accel., 10 mV/g, 2 to 7k Hz, no mating cable supplied
356B18	Platinum Stock Products; Triaxial, high sensitivity, ceramic shear ICP® accel., 1000 mV/g, 0.5 to 3k Hz, 4-pin conn.
356B20	Triaxial, miniature (4 gm), ceramic shear ICP® accel., 1 mV/g, 2 to 7k Hz, titanium hsg, mini 4-pin conn.
356B20/NC	Triaxial, miniature (4 gm), ceramic shear ICP® accel., 1 mV/g, 2 to 7k Hz, titanium hsg, mini 4-pin conn., no mating cable supplied
356B21	Platinum Stock Products; Triaxial ICP® accel., 10 mV/g, 500 g, 2 to 7 kHz, mini 4-pin conn., 10 ft cable included
356B21/NC	Platinum Stock Products; Triaxial ICP® accel., 10 mV/g, 500 g, 2 to 7 kHz, mini 4-pin conn., no mating cable supplied
356B41	Triaxial ICP® seat pad accel., 100 mV/g, 0.5 to 1000 Hz, 5-ft integral cable, conforms to ISO 10326-1
356B41/NC	Triaxial ICP® seat pad accel., 100 mV/g, 0.5 to 1000 Hz, 5-ft integral cable, conforms to ISO 10326-1, no mating cable supplied
357A05	Charge output accel., high temp., 17 pC/g, 500 g, 10kHz, 10-32 side conn., through hole mount
357A07	Low outgasing, miniature, charge output accel., high temp 1.7 pC/g, 15kHz, hermetic, titanium, M3 conn., to 500 F
357A07/NC	Low outgasing, miniature, charge output accel., high temp 1.7 pC/g, 15kHz, hermetic, titanium, M3 conn., to 500 F, No Cable included
357A08	Miniature (0.16 gm), teardrop-style, charge output accel., 0.3 pC/g , 10k Hz, 3-56 conn.
357A08/NC	Miniature (0.16 gm), teardrop-style, charge output accel., 0.3 pC/g , 10k Hz, 3-56 conn., no mating cable supplied
357A09	Miniature (0.6 gm) charge output accel., 1.7 pC/g, 10k Hz, titanium housing, 10-ft detachable cable
357A09/NC	Miniature (0.6 gm) charge output accel., 1.7 pC/g, 10k Hz, titanium housing, no mating cable supplied
357A100	UHT-12™, Charge output accel, high temp to to +900 F, 5 pC/g, 500 g, to 5 kHz, 2-pin connector, 3-hole mount
357A19/NC	Miniature, teardrop-style, Charge output accelerometer, 0.3 pC/g 3-56 connector, titanium housing
357A63	UHT-12 Charge output accel., high temp, 0.53 pC/g, to 6k Hz, 10-32 side conn, 5-40 thread mount, to +900 F, case isolated
357A64	UHT-12 accelerometer, +1200 F, 0.46 inch cube, stud mount, with screw tabs, 1 pC/g, 5000 g range, 10k Hz, case isolated
357A94	Charge output accel, 5pC/g, +1200F operation, int hardline cable with 7/16-27 2pin connector
357A95	Charge output accel, 5pC/g, +1200F operation, int hardline cable with 7/16-27 2pin connector
357B01	High temp., ceramic shear, charge output accel., 15 pC/g, 9k Hz, 10-32 side conn. (-95 F to +500 F)
357B02	High temp., ceramic shear, charge output accel., 15 pC/g, to 9k Hz, 10-32 top conn. (-95F to +500F)
357B03	Platinum Stock Products; High temp., ceramic shear, charge output accel., 10 pC/g, 9k Hz, 10-32 side conn.(-95 F to +500 F)
357B04	High temp., ceramic shear, charge output accel., 10 pC/g, 9k Hz, 10-32 top conn. (-95 F to +500 F)
357B06	Miniature (2 gm), ring-style, charge output accel., 5 pC/g, 10k Hz, 5-44 side conn.
357B11	High temp., miniature (2 gm), ceramic shear, charge output accel., 3 pC/g, 12k Hz, 5-44 side conn.(-95░F to +500░F)
357B12	High temp., miniature (2 gm), ceramic shear, charge output accel., 3 pC/g, 12k Hz, 5-44 top conn (-95 F to +500 F)
357B14	High temp., miniature (2 gm), ceramic shear, charge output accel., 3 pC/g, 12k Hz, 10-32 top conn. (-95░F to +500░F)
357B21	High temp., ceramic shear, charge output accel., 30 pC/g, 6k Hz, 10-32 side conn.(-95 F to +500 F)
357B22	High temp., ceramic shear, charge output accel., 30 pC/g, 6k Hz, 10-32 top conn. (-95F to +500F)
357B33	High temp., ceramic shear, charge output accel., 100 pC/g, 3k Hz, 10-32 side conn. (-95 F to +500 F)
357B34	High temp., ceramic shear, charge output accel., 100 pC/g, 3k Hz, 10-32 top conn. (-95 F to +500 F)
357B40	Miniature (4 gm), charge output accel., 5 pC/g, 0.40-inch cube, 10-32 side conn.
357B45	Charge output accel., 2.6 pC/g, 500 g, 8 kHz, 2.8 gm., 10-32 top conn., adhesive mount
357B53	Charge output accel., 100 pC/g, 150g, 3kHz, 10-32 side conn., high temp. +550 F (+288 C), Rad Hard
357B54	Charge output accel., 100 pC/g, 150g, 3kHz, 10-32 top conn., high temp. +550 F (+288 C), Rad Hard
357B61	High temp., ceramic compression, charge output accel., 10 pC/g, 5kHz, 10-32 side conn. (-65F to +900F), supplied with 10-ft hardline cable
357B61/NC	High temp., ceramic compression, charge output accel., 10 pC/g, 5kHz, 10-32 side conn. (-65░F to +900░F), no mating cable supplied
357B69	Charge output accel., high temp, 3 pC/g, to 6k Hz, 10-32 side conn, 10-32 mount, to +900 F
357B69/NC	Charge Output Accel., High Temp, 3 pC/g, to 6k Hz, 10-32 side conn, 10-32 mount, to +900 F, no cable
357C10	Miniature Charge Output Accel, 1.7 pC/g, 500 g, to 10 kHz, 0.45 gm, 3-56 conn.
357C10/NC	Miniature charge output accel, 1.7 pC/g, 500 g, to 10 kHz, 0.45 gm, 3-56 conn., no mating cable supplied
357C71	Charge output accel., 10 pC/g, 1000g, to 5 kHz, 2-pin conn., 3- hole mount, to +900 F
357C72	Charge output accel., 50 pC/g, 500 g, to 2.5 kHz, 2-pin connector, 3-hole mount, to +900 F
357C73	Charge output accel., 100 pC/g, 500 g, to 2 kHz, 2-pin conn., 3-hole mount, to +900 F
357E90	Charge output accel, with UHT-12TM shear sensing crystal, 5 pC/g, +1200 F operation, int hardline cable with smaller 10-32 coax
357E91	Charge output accel, with UHT-12TM shear sensing crystal, 5.0 pC/g, +1200 F operation, int hardline cable with smaller 10-32 coax
357E92	Charge output accel, with UHT-12TM shear sensing crystal, 2.3 pC/g, +1200 F operation, int hardline cable with smaller 10-32 coax
357M168	Charge output accel, with UHT-12TM Extreme Temperature, Miniature Accelerometer with Weld Tabs 1.15 pC/g 10 kHz -55 to 649 °C MI Hardline Cable 10ft
3641A122KG	MEMS crash accelerometer, undamped, 0.20 mV/g, +/-2000 g, 036 integral cable (side exit), length 30-ft, pigtails
3651A122KG	MEMS crash accelerometer, damped, 0.20 mV/g, +/-2000 g, 036 integral cable (side exit), length 30-ft, pigtails
3711E1110G	Single Axis MEMS DC accelerometer, 200 mV/g, +/-10g range, +6 to 30 VDC excitation
3711E11200G	Single Axis MEMS DC accelerometer, 10 mV/g, +/-200 g range, +6 to 30 VDC excitation
3711E1125G	Single Axis MEMS DC accelerometer, 80 mV/g, +/-25 g, +6 to 30 VDC excitation
3711E112G	Single Axis MEMS DC accelerometer, 1000 mV/g, +/-2 g range, +6 to 30 VDC excitation
3711E1150G	Single Axis MEMS DC accelerometer, 40 mV/g, +/- 50 g range, +6 to 30 VDC excitation
3711F11100G	Single Axis MEMS DC accelerometer, 14 mV/g, 100 g, 1/4-28 4-Pin Plug
3711F1110G	Single Axis MEMS DC accelerometer, 135 mV/g, 10 g, 1/4-28 4-Pin Plug Frequency Range: (±5%) 0 to 1000 Hz
3711F11200G	Single Axis MEMS DC accelerometer, 7 mV/g, 200 g, 1/4-28 4-Pin Plug
3711F112G	Single Axis MEMS DC accelerometer, 675 mV/g, 2 g, 1/4-28 4-Pin Plug
3711F1130G	Platinum Stock Products; Single Axis MEMS DC accelerometer, 45 mV/g, 2 g, 1/4-28 4-Pin Plug
3711F1150G	Platinum Stock Products; Single Axis MEMS DC accelerometer, 27 mV/g, 2 g, 1/4-28 4-Pin Plug
3711F12100G	Single Axis MEMS DC accelerometer, 14 mV/g, 100 g, 10 ft integral cable
3711F1210G	Single Axis MEMS DC accelerometer, 14 mV/g, 100 g, xx ft integral cable
3711F12200G	Single Axis MEMS DC accelerometer, 7 mV/g, 200 g, 10 ft integral cable
3711F122G	Single Axis MEMS DC accelerometer, 675 mV/g, 2 g, 10 ft integral cable
3711F1230G	Single Axis MEMS DC accelerometer, 45 mV/g, 30 g, 10 ft integral cable
3711F1250G	Single Axis MEMS DC accelerometer, 27 mV/g, 50 g, 10 ft integral cable
3713E1110G	Triaxial MEMS DC accelerometer, 200 mV/g, +/- 10 g, +6 to 30 VDC excitation
3713E11200G	Triaxial MEMS DC accelerometer, 10 mV/g, +/-200 g, +6 to 30 VDC excitation
3713E1125G	Triaxial MEMS DC accelerometer, 80 mV/g, +/-25 g, +6 to 30 VDC excitation
3713E112G	Triaxial MEMS DC accelerometer, 1000 mV/g, +/-2 g, +6 to 30 VDC excitation
3713E1150G	Triaxial MEMS DC accelerometer, 40 mV/g, +/-50 g, +6 to 30 VDC excitation
3713F11100G	Triaxial MEMS DC accelerometer, 13 mV/g, 100 g, 9-pin socket
3713F1110G	Platinum Stock Products; Triaxial MEMS DC accelerometer, 135 mV/g, 10 g, 9-pin
3713F11200G	Triaxial MEMS DC accelerometer, 7 mV/g, 200 g, 9-pin socket
3713F112G	Triaxial MEMS DC accelerometer, 675 mV/g, 2 g, 9-pin socket
3713F1130G	Platinum Stock Products; Triaxial MEMS DC accelerometer, 45 mV/g, 30 g, 9-pin socket
3713F1150G	Platinum Stock Products; Triaxial MEMS DC accelerometer, 27 mV/g, 50 g, 9-pin socket
3713F12100G	Triaxial MEMS DC accelerometer, 14 mV/g, 100 g, 10 ft integral cable
3713F1210G	Triaxial MEMS DC accelerometer, 135 mV/g, 10 g, 10 ft integral cable
3713F12200G	Triaxial MEMS DC accelerometer, 7 mV/g, 200 g, 10 ft integral cable
3713F122G	Triaxial MEMS DC accelerometer, 675 mV/g, 2 g, 10 ft integral cable
3713F1230G	Triaxial MEMS DC accelerometer, 45 mV/g, 30 g, 10 ft integral cable
3713F1250G	Triaxial MEMS DC accelerometer, 27 mV/g, 50 g, 10 ft integral cable
3741E12100G	HIGH SENSITIVITY DC ACCEL, Differential 100G, 10 ft. intergral cable
3741E1210G	HIGH SENSITIVITY DC ACCEL, Differential, 10G, 10 ft. intergral cable
3741E12200G	200G High Sensitivity DC MEMS Accel, Differential, 10 foot integral cable
3741E1225G	High Sensitivity DC accelerometer, Differential, 25G, 10 ft integral cable
3741E122G	HIGH SENSITIVITY DC ACCEL, Differential, 2 G, 10 ft. intergral cable
3741E122G/050JJ	HIGH SENSITIVITY DC ACCEL, Differential, 2 G, 50 ft. intergral cable
3741E1250G	HIGH SENSITIVITY DC ACCEL, Differential, 50G, 10ft. intergral cable
3741F12100G	Differential MEMS DC accelerometer, 27 mV/g, 100 g, 10 ft integral cable
3741F1210G	Differential MEMS DC accelerometer, 270 mV/g, 10 g, 10 ft integral cable
3741F12200G	Differential MEMS DC accelerometer, 13.5 mV/g, 200 g, 10 ft integral cable
3741F122G	Differential MEMS DC accelerometer, 1350 mV/g, 2 g, 10 ft integral cable
3741F1230G	Differential MEMS DC accelerometer, 90 mV/g, 30 g, 10 ft integral cable
3741F1250G	Differential MEMS DC accelerometer, 54 mV/g, 50 g, 10 ft integral cable
393A03	Seismic, ceramic shear ICP® accel., 1 V/g, 0.5 to 2k Hz, 2-pin top conn.
393B04	Seismic, miniature (50 gm), ceramic flexural ICP® accel., 1 V/g, 0.06 to 450 Hz, 10-32 top conn.
393B05	Seismic, miniature (50 gm), ceramic flexural ICP® accelerometer, 10 V/g, 0.7 to 450 Hz, 10-32 top connector
393B12	Seismic, high sensitivity, ceramic shear ICP® accel., 10 V/g, 0.15 to 1k Hz, 2-pin top conn.
393B31	Seismic, high sensitivity, ceramic flexural ICP® accel., 10 V/g, 0.1 to 200 Hz, 2-pin top conn.
393B32	Seismic, high sensitivity, ceramic flexural ICP® accelerometer 5.0 V/g, 0.2 to 200 Hz, 2-pin top connector
393C	Seismic, general purpose, quartz comp. ICP® accel., 1 V/g, 0.025 to 800 Hz, 10-32 side conn.
394A10	Vibration calibration standard system, 100 mV/g (for use with industrial & high mass accels.)
394A11	Vibration calibration standard system, 100 mV/g, 10-32 sensor mtg (CE approved)
394C06	Platinum Stock Product Handheld shaker, 1g at 159.2 Hz (for up to 210 grams total weight of sensor, cable and mtg. accessories).
3991B1120KG	MEMS Shock Accelerometer, 20 Kg, thru hole mount, 096 integral cable
3991B112KG	MEMS Shock Accelerometer, 2 Kg, thru hole mount, 096 integral cable
3991B1160KG	MEMS Shock Accelerometer, 60 Kg, thru hole mount, 096 integral cable
400A84	Cable test box
401A02	IN-LINE VOLTAGE FOLLOWER 100 pF
401A05	Low-noise ICP® load, for signal conditioner noise testing
401B04	ICP® sensor simulator, for signal conditioner testing
402A	In-line, source follower amplifier, 8 pF, low frequency (-5%) 0.5 Hz, 1.0 sec time constant
402A02	In-line, source follower amplifier, 100 pF, low frequency (-5%) 0.05 Hz, 10 sec time constant
402A03	In-line, source follower amplifier, 1000 pF, low frequency (-5%) 0.005 Hz, 100 sec time constant
402A11	In-line, source follower amplifier, 8 pF, low frequency (-5%) 50 Hz, 0.01 sec time constant
402A16	In-line, source follower amplifier, 250 pF, low frequency (-5%) 0.02 Hz, 25 sec time constant
402A17	In-line, source follower amplifier, 500 pF, low frequency (-5%) 1.0 Hz, 0.5 sec time constant
402B13	In-line, source follower amplifier, 1000 pF, low frequency (-5%) 2.5 Hz, 0.2 sec time constant
410C01	ICP® sensor signal cond., 35mm DIN-rail mount, peak track hold and waveform analog output, AC/DC coupling, gain, setup configurable via USB or Ethernet communications.
421B30	Differential charge amplifier for Dynamic pressure sensors to be used with PCB 176 sensors
421B31	Differential charge amplifier for Dynamic acceleration sensors to be used with 10pC/g sensors
422E35/A	In-line charge converter, 1 mV/pC, +/-2.5V output, -5% frequency 5 Hz, 10-32 jack output conn., for high temp sensors
422E55/D	In-line charge converter, 0.5 mV/pC, +/-5V output, -5% frequency 0.5 Hz, BNC jack input conn
422E65/A	In-line charge converter, 1 mV/pC, +/-5V output, -5% frequency 5 Hz, 10-32 jack conn., Rad Hard
422E66/A	In-line charge converter, 10 mV/pC, +/-5V output, -5% frequency 5 Hz, 10-32 jack conn., Rad Hard
441A101	AC power supply module (for Series 440 modules)
441A102	DC power supply module (for Series 440 modules)
441A33	3-slot chassis with computer control (for Series 440 modules)
441A35	5-slot chassis with computer control (for Series 440 modules)
441A42	2-slot chassis (for Series 440 modules)
442A102	1-channel module, ICP® sensor signal cond., unity gain
443B02	1-channel system, dual-mode charge amplifier system, line powered
443B101	1-channel module only, dual-mode vibration charge amplifier
443B102	1-channel module only, dual-mode charge amplifier
445B101	1-channel module, line-powered, single ended DC sensor signal cond., gain x1, x10, x100
472B01	Charge attenuator (divide by 10)
472B03	Charge attenuator (divide by 50)
474A001	In-line low-pass filter, input BNC jack, output BNC plug, 1 kHz
474A002	In-line low-pass filter, input BNC jack, output BNC plug, 2 kHz
474A005	In-line low-pass filter, input BNC jack, output BNC plug, 5 kHz
474A010	In-line low-pass filter, input BNC jack, output BNC plug, 10 kHz
474A020	In-line low-pass filter, input BNC jack, output BNC plug, 20 kHz
474A100	In-line low-pass filter, input BNC jack, output BNC plug, 100 kHz
477A01	Low pass plug-in filter, 100 Hz (-3dB point)
477A02	Low pass plug-in filter, 200 Hz (-3dB point)
477A03	Low pass plug-in filter, 500 Hz (-3dB point)
477A04	Low pass plug-in filter, 1 kHz (-3dB point)
477A05	Low pass plug-in filter, 2 kHz (-3dB point)
477A06	Low pass plug-in filter, 5 kHz (-3dB point)
477A07	Low pass plug-in filter, 10 kHz (-3dB point)
477A08	Low pass plug-in filter, 20 kHz (-3dB point)
477A09	Low pass plug-in filter, 50 kHz (-3dB point)
477A10	Low pass plug-in filter, 200 kHz (-3dB point)
478A01	1-channel, battery-powered, signal cond. for single-ended MEMS and capacitive sensors with 4-pin input conn.
478A05	3-channel, line-powered, signal cond. for single-ended MEMS and capacitive sensors, terminal strip input conn.
478A16	16-channel, line-powered, signal cond. for single-ended MEMS and capacitive sensors, (16) 4-pin conn.
478B05	3-channel, line-powered, signal cond. for single-ended MEMS and capacitive sensors, 4-pin input conn.
480B10	1-channel, battery-powered, ICP® sensor integrating signal cond. (accel./velocity/displacement)
480B21	3-channel, battery-powered, ICP® sensor signal cond., gain x1, x10, x100, BNC input/output conn.
480C02	Platinum Stock Products; 1-channel, battery-powered, ICP® sensor signal cond., unity gain, BNC input/output conn.
481A	16-channel, line-powered, ICP® sensor signal cond. (base model - requires options)
481A02	16-channel, line-powered, ICP® sensor signal cond., gain x1, x10, x100, computer/front panel control
481A01	16-channel, line-powered, ICP® sensor signal cond., unity gain, (16) BNC input/output conn.
481A03	16-channel, line-powered, ICP® sensor signal cond., fine gain, computer/front panel control, programmable filter
481A20	16-channel, line-powered, ICP® sensor signal cond., unity gain, freq. response to 1MHz
482A20	8-channel, line-powered, ICP® sensor signal cond., gain x1, x10, x100, BNC input/output conn.
482A21	1-channel, line-powered, ICP® sensor signal cond., unity gain, BNC input/output conn.
482A23	1-channel, line-powered, ICP® sensor signal cond., BNC input/output conn. X0.9 to x1.1 gain, (for use in 394A10/ 394A11 systems)
482A75	Power supply for 394A30 system
482B06	1-channel, line-powered, ICP® sensor signal cond., BNC input/output conn.
482B11	1-channel, line-powered, ICP® sensor signal cond., gain x1, x10, x100, BNC input/output conn.
482C05	Platinum Stock Products; 4-channel, line-powered, ICP® sensor signal cond., unity gain, BNC input/output conn.
482C15	Platinum Stock Product; 4-channel, Line-powered, ICP® sensor signal cond., Internal jumper selectable gain x1, x10, x100
482C16	4-channel, line-powered, ICP® sensor signal cond., incremental gain x0.1 to x200, RS-232
482C24	4-channel, line powered, ICP® sensor signal cond., AC/DC coupling, gain x0.1 to x200
482C27	4-channel, line-powered, bridge/differential/ICP® sensor signal cond., incremental gain, Autozero, RS-232, Ethernet
482C54	4-channel, line-powered, ICP®/charge sensor signal cond., incremental gain, selectable charge conversion, TEDS, 10k LPF, RS-232
482C64	4-channel, line-powered, ICP®/charge sensor signal cond., incremental gain, selectable charge conversion, TEDS, 10k LPF, RS-232, Ethernet
483C05	8-channel, line-powered, ICP® sensor signal cond., unity gain, BNC input/output conn., rack mount
483C15	8-channel, line-powered, ICP® sensor signal cond., internal jumper selectable gain x1, x10, x100, rack mount
483C28	8-channel, line-powered, bridge/differential/ICP® sensor signal cond., incremental gain, Autozero, Ethernet
483C30	8-channel, line-powered, ICP®/charge sensor signal cond., gain, Ethernet, ext. cal., selectable input ground isolation
483C40	8-channel, line-powered, ICP®/charge sensor signal cond., gain, selectable LPF, Ethernet
483C41	8-channel, line-powered, ICP®/charge sensor signal cond., gain, selectable LPF, Ethernet, keypad/display
483C50	8-channel, line-powered, ICP® sensor signal cond., x0.1 to x200 gain, TEDS, Ethernet
484B06	1-channel, line-powered, ICP® sensor signal cond., AC/DC coupling, BNC input/output conn.
485B	1-channel, DC-powered, ICP® sensor signal cond., 2 to 20 mA adj (operates from +18 to +30 VDC power source)
485B36	2-channel, USB-powered, ICP® signal conditioner, unity gain
488A02	Tabletop battery charger, selectable input voltage, 110 and 220 VAC (for Series 480)
488A03	AC power source, 115 VAC to 27 VDC (for Series 480)
F488A03	AC power source, 230 VAC to 27 VDC (for Series 480)
488A08	Battery charger for 12 VDC Nickel Metal Hydride battery supplied in Model 441A102 module
488A13	Auto lighter adaptor, 6-pin mini DIN supplies 12 VDC output (for use with the 482C16 thru 482C64)
488B04	Universal AC power adapter, 100-240 VAC/ 50-60 Hz input, 33 VDC output, 5-pin DIN (for models 482C05 and 482C15), line cord
488B07	DC power pack (for use with the 482A21/A22 and 482C05/C15)
488B10	Universal AC power adapter, 100-240 VAC/ 50-60 Hz input, 33 VDC output, 6-pin mini DIN (for models 480B21), line cord
492B	ICP® sensor simulator, 100 Hz sine and square wave, 0 to 10 V pk-pk adj. output
492B03	Calibration reference signal generator, charge/voltage pulse, adj. amplitude (for calibrating charge and voltage systems)
65A	Spark plug adaptor (Specify type of plug), short tube (for Series 112)
740B02	ICP® piezoelectric strain sensor, titanium hsg
AA	10 -32 connector (used only with W option on a sensor only)
AB	BNC jack
AC	BNC plug
ACS-0	Single axis calibration for non-PCB piezoelectric accel.
ACS-0/ERC-5	Competitor system calibration with signal conditioner
ACS-0T	Recalibration of non-PCB piezoelectric triaxial accel.
ACS-0T/ACS-97T	Triaxial amplitude response calibration of competitive model, from 10 Hz to upper 5% frequency, NIST traceable (ACS-97T includes 1 Hz to 10 Hz phase and response data)
ACS-1	Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable
ACS-1/ACS-4	Single axis amplitude response calibration from 0.5 Hz to upper 5% frequency, NIST traceable (requires 20 mV/g min. sensitivity)
ACS-1/ACS-97	Single axis amplitude response calibration from 1 Hz to upper 5% frequency, NIST traceable (Requires ACS-1 or equivalent and min 1 mV/g)
ACS-1/ERC-1	System Cal for an Accelerometer, (ACS-1) and 422D/E In-Line Charge Amp, (ERC-1)
ACS-1/ERC-8	System Recalibration of accelerometer, (ACS-1) and a 487 meter, (ERC-8)
ACS-10	System calibration for Series 394A back-to-back calibration standard systems. NIST traceable. 394A0x systems include Frequency sweep from 5 Hz to upper 5% spec. 394A1x systems include Frequency sweeps from 0.5 Hz to 10 Hz and from10 Hz to upper 5% spec.
ACS-10/ACS-4	System cal, Series 394 back-to-back cal standard system. Frequency sweep from 0.5 Hz to upper 5% spec. NIST Traceable
ACS-10/ACS-4/ACS-5	Single axis amplitude response calibration from 0.5 Hz to 15kHz frequency, NIST traceable
ACS-100	System laser primary calibration of Kistler 808K1 and 561T at customer defined points 2Hz to 100kHz
ACS-101	CD containing calibration results of ACS-22 and ACS-14
ACS-102	Single axis accelerometer calibration from 10 Hz to 20 kHz with primary calibraion traceability.
ACS-102A	ACS-102 calibration data on CD
ACS-103	Single axis accelerometer calibration from 2 Hz to upper 5% frequency (for DC Sensors only)
ACS-103A	Calibration of 3741E sensors from 2 Hz to 5% and 10% tolerance
ACS-103T	Triaxial accelerometer calibration from 2 Hz to upper 5% frequency, (for 3713 DC Accels only).
ACS-104	Additional single test point - amplitude and frequency, with result added to standard cal cert in a text field.
ACS-106	Primary laser calibration from 1 Hz to 5 Hz and 5 Hz to 15 kHz, 41 defined points, phase and amplitude, with two paper certs and data on disk
ACS-107	System Calibration, output velocity, single point 60 Hz@2g pk
ACS-11	Single axis long stroke shaker amplitude response cal from 0.5 Hz to upper 5% point (max 1000 Hz, min 50 mV/g)
ACS-110A	Primary Laser Calibration per Customer Specifications
ACS-110B	Primary Laser Calibration from 5 Hz to 20 kHz (>15 kHz is not A2LA), 22 defined points, amplitude and phase, paper cert only
ACS-110C	Primary laser calibration from 5Hz to 20kHz kHz, 20 defined points, phase and amplitude, with paper certs and data on disk
ACS-111	Accelerometer Calibration, 10 Hz to 3 dB point, Reference to 100 Hz, with temperature coefficient at 70 C and 121 C.
ACS-111A	Custom certification to verify sensor dimensions, wire color, bias voltage, etc., per accelerometer model requirements
ACS-113	14 point low frequency roto-gravimetric and primary laser calibration from 0.07 Hz to 10 Hz at customer defined points
ACS-115	Primary Laser Calibration from 1 to 10 Hz on long stroke shaker and 10 Hz to 20 kHz (>15 kHz is not A2LA), on air bearing shaker, amplitude and phase, paper cert only
ACS-116	Primary Laser calibration of Model 301M21 between 1 Hz and 100 Hz at customer defined points
ACS-117	Primary Laser cal of Model 301M15 from 1 Hz to 10 kHz at customer defined points
ACS-118	Back to Back Cal on Air Bearing shaker @10 g's from 5 Hz to 20 kHz. (>15 kHz is not A2LA). Gravimetric calibration 20 kHz. to 40 kHz
ACS-119	Primary laser calibration from 10 Hz to 1000 Hz, 13 defined points, paper cert
ACS-11T	Triaxial long stroke shaker amplitude response cal from 0.5 Hz to upper 5% point (max 1000 Hz, min 50 mV/g)
ACS-12	Calibration of non-PCB accel. system, 10 Hz to upper 5% frequency
ACS-120	Single Axis Amplitude Response Calibration from 10 Hz to 2kHz NIST Traceable
ACS-121	Primary Laser Calibration from 1 to 10 Hz on long stroke shaker and 5 Hz to 20 kHz (>15 kHz is not A2LA), on air bearing shaker, amplitude and phase, paper cert only
ACS-122	Single axis, high frequency, amplitude response cal from 10k to 20k Hz (requires ACS-1 or equivalent)
ACS-127	Calibration for model 351M35 Cyrogenic Accel
ACS-128	Primary laser system calibration of Accel with 442A102 from 0.5 Hz to 200 Hz, phase and amplitude,18 defined points, two certs
ACS-129	Primary Laser Calibration from 1 to 10 Hz on long stroke shaker and 8 Hz to 3500 Hz on air bearing shaker, amplitude and phase, paper cert only
ACS-13	System calibration for Series 394 back-to-back cal standard systems w/data stored on disk. (for TMS 9150 cal system only)
ACS-130	Single axis amplitude response calibration from 5 Hz to highest specified frequency up to 10 kHz
ACS-131	Back to back calibration of Endevco 2270 reference standard accel from 5 Hz to 10 kHz
ACS-132	Recalibration of Silicon Designs 2210 series DC accels from 0.5 Hz to upper 3 dB spec
ACS-133	Amplitude and phase response for Model 3711B03 from 0.5 Hz to +/- 3 dB point
ACS-135	Primary laser system calibration of Accel with 442A102 from 0.5 Hz to 200 Hz, phase and amplitude, 20 defined points, two certs
ACS-136	Primary laser system calibration of Accel from 0.5 Hz to 200 Hz, phase and amplitude, 20 defined points, two certs
ACS-137	Primary calibration Accelerometer from 2 Hz to 10 kHz with (41)customer defined points
ACS-138	pre-cal bake, cal cert from 4-200Hz
ACS-139	CAL-HF (10KHZ TO 50KHZ) (AT401-20) Data on disc. Requires ACS-1.
ACS-14	High G accel. verification using Hopkinson bar to max g range, (NIST traceable). (also requires ACS-1)
ACS-140	Primary calibration from 1Hz to 15kHz.
ACS-144	Shock Sensor Calibration, PneuShock Linearity at 500, 1000, 2000, 5000, and 10000 g-pk, Frequency Response from 10 Hz to 20000 Hz on +/-3dB Scale
ACS-145	Phase and Magnitude from 2 Hz to 3 dB using log scale (1), for 3711E and 3741E series
ACS-145T	Triaxial calibration, 3713E, Phase and Magnitude from 2 Hz to 3 dB using log scale (1)
ACS-147	High G PR accel. verification using Hopkinson bar, 10.0 VDC excitation full scale range with 3 data points included
ACS-147T	High G Triaxial PR accel verification using Hopkinson bar 10.0 VDC excitation full scale range with 3 data points included
ACS-148	Calibration from 10 Hz to 20kHz amplitude and phase data to be supplied through the entire band. Multiple certs are acceptable
ACS-14A	High G accel. verification using Hopkinson bar to customer supplied data points of 10kg, 15kg, 20kg, 25kg, and 30kg
ACS-14B	Amplitude linearity with customer supplied data points 100g, 300g, 500g, 1000g and 1500g on Pneushock system. Zero shift with NOT be reported
ACS-14D	5-pt amp linearity, Hopkinson Bar to customer max (round whole kg), 20% increments up to 15 kg for PE shock accels, limited by overload shk limit, unless appr by PCB Eng
ACS-15	Calibration of Series 740
ACS-157	Phase calibration on both the acceleration and force outputs on a impedance heard 10Hz to +5% point
ACS-159	Single axis amplitude response calibration from 50 Hz to upper 5% frequency, NIST traceable
ACS-159T	Triaxial amplitude response calibration from 50 Hz to upper 5% frequency, NIST traceable
ACS-160	Offset voltage specification of ±20 mV for 3641A122KG and 3651A122KG
ACS-164	Single Axis accel calibration from 5 Hz to 15 kHz, with Phase Calibration, and Equipment List printed on 3 separate sheets
ACS-165	Single axis, low frequency amplitude response cal from 1 to 50 Hz.
ACS-166	Single axis amplitude response calibration from 50 Hz to 20k Hz frequency, NIST traceable
ACS-169	Vibration, Pneushock & Hopkinson Bar Shock test with customer defined points
ACS-17	Seatpad triaxial amplitude response cal from 0.5 to 100 Hz (for Models 356A40, 356B40, & 356B41)
ACS-172	Single axis phase and amplitude calibration from 5Hz to +5% frequency range. NIST traceable.
ACS-172T	triaxial axis phase and amplitude calibration from 5Hz to +5% frequency range. NIST traceable.
ACS-17A	Seatpad triaxial amplitude response cal from 0.5 to 150 Hz (for Models 356A40, 356B40, & 356B41)
ACS-18	Recalibration for non-PCB DC accel. (with or without customer supplied power source)
ACS-19	Single axis calibration from 5 Hz to upper 5% point on a linear scale, includes data points on paper cert
ACS-1T	Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable
ACS-2	Single axis, one-point at 100 Hz, amplitude response calibration, NIST traceable
ACS-20	Calibration of precision condenser microphones
ACS-21	Calibration 130 Series microphone; microphone/preamplifier together. Not A2LA
ACS-22/ACS-14	Amplitude response calibration for shock accelerometer, 100 Hz to upper 1 dB frequency, max 15 kHz (ISO 17025) and High-G verification using Hopkinson bar to max g range,
ACS-22/ACS-14A	Amplitude response calibration for shock accelerometer, 100 Hz to upper 1 dB freq, max 15 kHz (ISO 17025) High-G verification using Hopkinson bar to customer supplied data points of 10kg 15kg 20kg 25kg & 30kg
ACS-22T	Triaxial amplitude response calibration for shock accelerometer, 100 Hz to upper 1 dB frequency (max 15 kHz)
ACS-22T/ACS-14T	Triaxial amplitude response calibration for shock accelerometer, 100 Hz to upper 1 dB frequency (max 15 kHz) and High G accel. verification using Hopkinson bar to max g
ACS-23	Single axis amplitude response calibration from 5 Hz to upper 5% frequency, NIST traceable, Scale is linear, max/min +/- 10%
ACS-23T	Triaxial amplitude response calibration from 5 Hz to upper 5% frequency, NIST traceable, Scale is linear, max/min +/- 10%
ACS-24	Calibration/recalibration of CAL200
ACS-25	Single axis amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable
ACS-25T	Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable
ACS-26	Recalibration of Model 394A40 Pistonphone
ACS-27	Competitor shock accelerometer calibration
ACS-28	Recalibration of 2-channel 200 V external polarized power supply
ACS-29	Calibration of Piezoresistive Accelerometer, 10Hz to 5KHz, 10 VDC excitation
ACS-29B	Calibration of Piezoresistive Accelerometer, 10Hz to 5KHz, 12 VDC excitation
ACS-2T	Triaxial, one point @ 100 Hz, per axis amplitude response cal, NIST traceable
ACS-3	Single axis phase calibration, from 10 Hz to upper 5% point (Requires ACS-1 or equivalent)
ACS-30	Single axis extended frequency, amplitude response cal from upper 5% frequency to 10k Hz, NIST traceable (Requires ACS-1 or equivalent)
ACS-30T	Triaxial extended frequency, amplitude response cal from upper 5% frequency to 10k Hz, NIST traceable (Requires ACS-1T or equivalent)
ACS-32	Single axis amplitude response callibration extended to +/- 3dB frequency point (requires ACS-1 or equivalent)
ACS-33	Frequency calibration of 350 series, 10 to 100 Hz on long stroke shaker, 100Hz to +/-1dB on mid range shaker, and ACS-14 Hopkinson Bar Calibration; frequency response displayed on linear graph with +/-10% limits.
ACS-34	Tabulated data file provided on disk for any accel. or Series 394 calibration systems, (requires ACS-1, ACS-10 or equivalent)
ACS-35	Standard Primary Laser Calibration, 22 point, 5 Hz to 10 kHz, with paper cert only
ACS-36	Calibration for 301M15 with tabulated data
ACS-37	Non PCB Calibrator
ACS-39	ACS-1 & ACS-4 WITH TABULAR DATA
ACS-3T	Triaxial phase calibration, from 10 Hz to upper 5% point (Requires ACS-1T or equivalent)
ACS-4	Single axis, low frequency phase and amplitude response cal from 0.5 to 10 Hz, (requires ACS-1 and minimum sensitivity of 20 mV/g)
ACS-40	Tabulated calibration data provided on printed certificate (requires ACS-1 or equivalent)
ACS-42	Calibration of a (Type 1) microphone & preamp (PCB & competitive) as mated pair
ACS-44	Extended Frequency Response Calibration to +10% point (requires ACS-1)
ACS-44T	Extended Frequency Response Calibration to +10% point on a triax accel, (requires ACS-1T)
ACS-45	Calibration of 300A12 system
ACS-46	Specialty Mic orTEDS system cal for non PCB mics and preamps
ACS-47	20KG and 60KG PR accel. verification using Hopkinson bar, 10.0 VDC excitation full scale range with 3 data points included
ACS-48	Primary Calibration, single point at 1 Hz
ACS-49	Primary laser calibration from 2 Hz to 10 kHz, 36 defined points, two certs
ACS-4T	Triaxial, low frequency phase & amplitude response calibration from 0.5 to 10 Hz, (requires ACS-1T and minimum sensitivity of 20 mV/g)
ACS-5	Single axis, extended frequency & amplitude response calibration from upper 5% frequency to 15 kHz, NIST traceable (Requires ACS-1 or equivalent)
ACS-50	Primary laser calibration from 4 Hz to 20 kHz, 36 defined points, two certs
ACS-52	Single Axis Amplitude Cal -3dB to +3dB frequency range
ACS-53	High G accel. verification using Hopkinson bar to max g range, (not NIST traceable).
ACS-54	Primary laser calibration from 1 Hz to 10 Hz, 6 defined points, paper cert
ACS-55	Primary laser calibration from 0.5 Hz to 10 Hz and 15 Hz to 100 Hz, 10 defined points, two certs
ACS-56	Single axis amplitude response calibration from 10 Hz to upper 5% frequency (for Series 3741 over 10g)
ACS-58	Frequency calibration of 350 series, 5 to 100 Hz on long stroke shaker, 100Hz to +/-1dB on mid range shake; frequency response displayed on linear graph with +/-10% limits.
ACS-58T	Frequency calibration of triax 350 series, 5 to 100 Hz on long stroke shaker, 100Hz to +/-1dB on mid range shake; frequency response displayed on linear graph with +/-10% limits.
ACS-5T	Triaxial, extended frequency & amplitude response calibration from upper 5% frequency to 15 kHz, NIST traceable (requires ACS-1T or equivalent)
ACS-6	Single axis, high frequency, amplitude response cal from 15k to 20k Hz (requires ACS-1 or equivalent)
ACS-60	Calibration of a 1/8" microphone
ACS-62	Shock Pulse Calibration of single axis piezoresistive shock accelerometer to maximum amplitude of 5k g, 10.0 VDC excitation
ACS-62A	Shock Pulse Calibration of single axis piezoresistive shock accelerometer to maxium amplitude of 5k g, 3.3 VDC excitation
ACS-62AT	Shock Pulse Calibration of triaxial piezoresistive shock accelerometer to maximum amplitude of 5k g, 3.3 VDC excitation
ACS-62B	Shock Pulse Calibration of single axis piezoresistive shock accelerometer to maximum amplitude of 5k g, 5.0 VDC excitation.
ACS-62BT	Shock Pulse Calibration of triaxial piezoresistive shock accelerometer to maximum amplitude of 5k g, 5.0 VDC excitation
ACS-62C	Calibration of High G PR Accelerometer to 10,000 g's, 10.0 VDC excitation. Pulse width 100 - 200 micro seconds
ACS-62T	Shock Pulse Calibration of triaxial piezoresistive shock accelerometer to maximum amplitude of 5k g, 10.0 VDC excitation
ACS-63	Calibration for microphone/preamplifier with TEDS programming PCB or competitive)
ACS-65	Primary laser calibration from 2 Hz to 10 Hz and 5 Hz to 20 kHz, 38 data points, with phase and amplitude. Two separate paper certificates and data also in Excel format
ACS-66	Single Axis Amplitude Response Calibration from 10 Hz to 2k Hz NIST Traceable
ACS-66T	Triaxial Amplitude Response Calibration from 10 Hz to 2k Hz, NIST Traceable
ACS-67	Primary laser calibration, single point at 10 g, 160 Hz with paper cert
ACS-68	Single Axis Amplitude Response Calibration from 5 Hz to upper 5% plotted on dB scale
ACS-68T	Triaxial Amplitude Response Calibration from 5 Hz to Upper 5% Plotted on dB Scale
ACS-69	Gravitational Turn-over Calibration for High Sensitivity DC Accelerometers
ACS-6A	Single axis accelerometer calibration from 10 kHz to 20 kHz
ACS-6T	Triaxial, high frequency, amplitude response cal from 15k to 20k Hz (requires ACS-1 or equivalent)
ACS-7	Single axis, high frequency, amplitude response cal from 100 to 50k Hz (for accels up to 12 gm) (requires ACS-1 or equivalent)
ACS-70	Primary laser calibration from 5 Hz to 10 kHz, standard 22 defined points, with paper cert and data on disk
ACS-71	Primary system calibration from 2 Hz to 6 Hz at 100, 250, 500, and 800 mg, 36 defined points, paper cert
ACS-72	Calibration for 301M15 with 35 Custom Points
ACS-74	PneuShock Single Axis Accel Calibration - 5 points (100 g min) in 20% increments to FS up to 10,000 g max